LM339APWE4 Overview

In order to make transportation easier, it is packaged in TSSOP .A comparator with an output type of TTL is being used.As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A total of 14 pins are included.The comparator consists of 14 pins.There is 2.5mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 2mA .A current supply greater than 2mA may cause the comparator to malfunction.The device can be run with 5V power supplies.Comparator electronics follows that the voltage gain of the part is 106.02dB .In general, temperatures higher than 70°C are not recommended.Comparator electronics will not be able to function at temperatures below 0°C .A comparator's maximum supply voltage is 30V volts.Using a voltage as low as 2V is possible for this comparator.For the output quality to be maintained, 4 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.A 20mA output current is specified for this device.

LM339APWE4 Features

TTL output capability
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
COMPARATOR amplifier

LM339APWE4 Applications

There are a lot of Texas Instruments
LM339APWE4 linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications