Interface ICs

IC VREF SERIES 0.33% 8SOIC.Series Voltage Reference IC Fixed 3V V ±0.33% 30 mA 8-SOIC

IC REG LIN NEG ADJ 500MA 12-DFN.Linear Voltage Regulator IC Negative Adjustable 1 Output 500mA 12-DFN (3x3)

IC REG LIN POS ADJ 500MA 10DFN.Linear Voltage Regulator IC Positive Adjustable 1 Output 500mA 10-DFN (3x3)

DGTL ISO 5KV 3CH RS422 16-SOIC.RS422, RS485 Digital Isolator 5000Vrms 3 Channel 16Mbps 25kV/µs CMTI 16-SOIC (0.295", 7.50mm Width)

IC PLL FREQ SYNTHESIZER 24LFCSP.IC 13GHz 1 24-WFQFN Exposed Pad, CSP

100 Termination 0.5mm Tin Direct Digital Synthesis AD9910 100 Pin 1GHz 1.8V 100-TQFP Exposed Pad

IC OPAMP GP 2 CIRCUIT 8SOIC.Standard Amplifier 2 Circuit Rail-to-Rail 8-SOIC

Analog Devices AD8421ARMZ is a low-noise, high-speed precision instrumentation amplifier designed for medical instruments, data-acquisition systems, vibration analysis, microphone preamplifiers, multiplexed inputs, and ADC driver circuits. The device offers programmable gain from 1 to 10,000 using one external resistor, 3nV/√Hz typical input voltage noise, 10MHz bandwidth at gains of 1 and 10, a 35V/µs slew rate, and 84dB minimum DC CMRR at unity gain. AD8421ARMZ operates from a 5V to 36V single supply or ±2.5V to ±18V dual supplies while consuming only 2mA typical current. Supplied in a compact RoHS-compliant 8-lead MSOP package, this standard-grade instrumentation amplifier is specified from −40°C to +85°C and provides high input impedance, fast settling, low offset, and protected inputs for demanding precision signal-conditioning applications.

IC INST AMP 1 CIRCUIT 8MSOP.Instrumentation Amplifier 1 Circuit 8-MSOP

IC ADC 16BIT SAR 10MSOP.16 Bit Analog to Digital Converter 1 Input 1 SAR 10-MSOP

IC DAS/ADC 16BIT 200K 64LQFP.Data Acquisition System (DAS), ADC 16 b 200k DSP, MICROWIRE™, Parallel, QSPI™, Serial, SPI™ 64-LQFP (10x10)

IC DAC 16BIT V OR A-OUT 24TSSOP.16 Bit Digital to Analog Converter 1 24-TSSOP-EP

Analog Devices MAX3072EESA+T is a 3.3 V half-duplex RS-485/RS-422 transceiver supporting data rates up to 250 kbps. It combines a slew-rate-limited driver, true fail-safe receiver, hot-swap enable inputs, and ±15 kV Human Body Model ESD protection on the differential bus pins. Its 1/8-unit-load receiver supports up to 256 transceivers within the RS-485 loading budget, while low-power shutdown helps reduce standby consumption. Supplied in a lead-free eight-pin narrow SOIC package with tape-and-reel packaging, the MAX3072EESA+T operates over an ambient temperature range of −40°C to +85°C. It is suitable for industrial control, instrumentation, lighting, security, and equipment-monitoring communication interfaces.

Analog Devices ADP5360ACBZ-2-R7 is a single-cell lithium-ion and lithium-polymer battery-management PMIC integrating a programmable linear charger, voltage-based fuel gauge, battery protection, buck regulator, and buck-boost regulator. It supports charging currents up to 320 mA, a 4.1 V to 6.8 V charger input range, and I²C configuration with interrupt reporting. The -2 version features factory-programmed 1.8 V buck and 3.3 V buck-boost voltage settings. Shipment mode, watchdog supervision, and manual-reset support make it suitable for compact rechargeable electronics. Housed in a 32-ball, 2.56 mm × 2.56 mm WLCSP, the ADP5360ACBZ-2-R7 supports wearable devices, portable consumer products, and battery-powered monitoring equipment.

Analog Devices, Inc. AD8221ARMZ is a precision instrumentation amplifier offering programmable gain from 1 to 1000 with one external resistor. It provides 80dB minimum common-mode rejection through 10kHz at unity gain, 8nV/√Hz maximum input-voltage noise, 70µV maximum input offset, and 825kHz bandwidth at G = 1. The device operates from ±2.3V to ±18V supplies while consuming approximately 0.9mA, making it suitable for precision bridge, strain-gauge, load-cell, transducer, industrial control, medical instrumentation, and data-acquisition applications. AD8221ARMZ is supplied in a compact RoHS-compliant 8-lead MSOP package and is specified from −40°C to +85°C, with operation characterized through +125°C. Its high input impedance, low bias current, wideband CMRR, and flexible gain provide accurate amplification of low-level differential sensor signals.

Analog Devices AD9833BRMZ-REEL7 is a low-power programmable direct digital synthesis waveform generator that produces sine, triangular, and square-wave outputs from 0Hz to 12.5MHz. Its 28-bit frequency-control architecture provides approximately 0.1Hz resolution with a 25MHz reference clock, while two frequency registers and two phase registers support rapid software-controlled waveform changes. The device operates from 2.3V to 5.5V, consumes 12.65mW at 3V, and uses a high-speed 3-wire SPI-compatible interface. Supplied in a RoHS-compliant 10-lead MSOP package on a 7-inch reel, the AD9833BRMZ-REEL7 is designed for sensor excitation, flow measurement, sweep and clock generators, time-domain reflectometry, line-loss testing, medical equipment, and programmable signal-generation applications.

Analog Devices ADG1208YRUZ-REEL7 is an 8-channel iCMOS® analog multiplexer featuring 8:1 signal routing, 120Ω on-resistance, <1pC charge injection, 1pF off capacitance, 550MHz bandwidth, rail-to-rail signal handling, ±15V dual supply operation, and a 16-lead TSSOP package. Designed for precision data acquisition, automated test equipment, industrial measurement, communication systems, medical electronics, and analog signal routing applications, the ADG1208YRUZ-REEL7 provides reliable, low-distortion, and low-power analog switching performance.

Analog Devices AD8552ARZ-REEL is a precision zero-drift dual CMOS operational amplifier featuring 1µV offset voltage, 0.005µV/°C offset drift, rail-to-rail input/output operation, 130dB CMRR and PSRR performance, 1.5MHz gain bandwidth product, 0.4V/µs slew rate, and 2.7V to 5V single-supply operation. Designed for temperature sensors, pressure sensors, strain gauge amplifiers, precision current sensing, medical instrumentation, and data acquisition systems, the AD8552ARZ-REEL delivers ultra-high DC accuracy, low noise, and long-term stability in an 8-lead SOIC package.

Analog Devices AD8221ARZ-R7 is a precision programmable gain instrumentation amplifier featuring adjustable gain from 1 to 1000, 825kHz bandwidth, 80dB minimum CMRR at 10kHz, 8nV/√Hz low input noise, low offset voltage, high input impedance, and wide ±2.3V to ±18V supply operation. Designed for strain gauges, bridge sensors, industrial instrumentation, biomedical equipment, aerospace measurement systems, and precision data acquisition applications, the AD8221ARZ-R7 delivers accurate, low-noise differential signal amplification in an 8-lead SOIC package.

The ADUM121N1BRZ-RL7 is an Analog Devices dual-channel digital isolator based on iCoupler® magnetic isolation technology. Designed for high-speed signal isolation applications, the device provides 150Mbps data transmission, 3000Vrms isolation voltage, 75kV/µs common-mode transient immunity, low propagation delay, and wide 1.7V to 5.5V supply compatibility in a compact SOIC-8 package. The ADUM121N1BRZ-RL7 is ideal for industrial automation, motor-control systems, power converters, isolated communication interfaces, renewable energy equipment, and high-reliability embedded electronic systems requiring fast and robust digital isolation.

Analog Devices AD7190BRUZ-REEL 24-Bit Ultra-Low Noise Sigma-Delta ADC with PGA The Analog Devices AD7190BRUZ-REEL is a high-precision 24-bit Sigma-Delta ADC featuring ultra-low noise performance, integrated programmable gain amplifier, flexible differential input configuration, and SPI/DSP-compatible digital interface. Designed for industrial measurement, load cell systems, temperature monitoring, precision instrumentation, and sensor data acquisition applications, the AD7190BRUZ-REEL provides exceptional accuracy and stability for demanding analog measurement systems.

Analog Devices AD8221ARZ-R7 is a precision programmable gain instrumentation amplifier featuring adjustable gain from 1 to 1000, 825kHz bandwidth, 80dB minimum CMRR at 10kHz, 8nV/√Hz low input noise, low offset voltage, high input impedance, and wide ±2.3V to ±18V supply operation. Designed for strain gauges, bridge sensors, industrial instrumentation, biomedical equipment, aerospace measurement systems, and precision data acquisition applications, the AD8221ARZ-R7 delivers accurate, low-noise differential signal amplification in an 8-lead SOIC package.

Analog Devices AD8606ARZ-REEL7 is a precision dual CMOS operational amplifier featuring DigiTrim® technology, 80µV maximum offset voltage, 8nV/√Hz low noise density, rail-to-rail input/output operation, 10MHz gain bandwidth product, 5V/µs slew rate, 2.7V to 5.5V single-supply operation, and an 8-lead SOIC package. Designed for sensor signal conditioning, precision instrumentation, photodiode amplification, active filters, battery-powered devices, and data acquisition systems, the AD8606ARZ-REEL7 delivers accurate, low-noise, and energy-efficient analog signal processing performance.

Analog Devices AD8253ARMZ-R7 is a programmable gain instrumentation amplifier featuring selectable gains of 1, 10, 100, and 1000, 10MHz bandwidth, 20V/µs slew rate, 100dB common-mode rejection ratio, 150µV maximum offset voltage, low distortion, and MSOP-10 packaging. Designed for precision data acquisition, industrial sensors, biomedical equipment, automated test systems, and signal conditioning applications, the AD8253ARMZ-R7 provides accurate, flexible, and high-performance analog amplification for demanding measurement systems.

Analog Devices AD8656ARZ-REEL7 is a low-noise precision dual CMOS operational amplifier featuring DigiTrim® technology, 2.7 nV/√Hz voltage noise density, 250µV maximum offset voltage, rail-to-rail input/output operation, 28MHz gain bandwidth product, 11V/µs slew rate, and 2.7V to 5.5V supply operation. Designed for ADC/DAC buffering, precision filters, industrial controls, audio systems, automotive electronics, and data acquisition applications, the AD8656ARZ-REEL7 delivers high accuracy, low distortion, and reliable analog signal processing performance in an 8-lead SOIC package.

AD823ARZ-R7 is a dual 16MHz rail-to-rail FET input operational amplifier manufactured by Analog Devices Inc. Featuring two amplifier channels, FET-input architecture, rail-to-rail output swing, 16MHz bandwidth, fast slew rate, low supply current, industrial temperature operation, and compact SOIC-8 surface-mount package, it is suitable for sensor signal conditioning, high-impedance analog front ends, ADC input buffering, active filters, portable instruments, battery-powered devices, industrial measurement systems, and embedded analog circuits. The AD823ARZ-R7 provides reliable Analog Devices op amp performance for compact, low-power, and high-impedance signal-chain designs.

AD8429ARZ-R7 is a low-noise precision instrumentation amplifier manufactured by Analog Devices. Featuring 1nV/√Hz input noise, 15MHz bandwidth, 22V/µs slew rate, high CMRR, wide ±4V to ±18V supply operation, and compact SOIC-8 surface-mount package, it is suitable for sensor signal conditioning, bridge measurement, strain gauge interfaces, load cells, medical instrumentation, industrial data acquisition, vibration monitoring, laboratory equipment, and precision analog front-end circuits. The AD8429ARZ-R7 delivers high accuracy, low noise, and reliable Analog Devices instrumentation amplifier performance for demanding small-signal measurement applications.

DS1302ZN+T&R is an Analog Devices / Maxim Integrated trickle-charge real-time clock chip in an 8-SOIC package. It integrates a clock/calendar, 31 bytes of static RAM, a simple 3-wire serial interface, 12/24-hour time format support, automatic month-end adjustment, leap-year correction, and a programmable trickle charger for backup battery or supercapacitor operation. It is suitable for embedded systems, consumer electronics, industrial control, data loggers, energy meters, security systems, battery-backed devices, and MCU-based products requiring reliable real-time clock and calendar functions.

AD8031ARTZ-REEL7 is an Analog Devices single high-speed rail-to-rail input/output voltage-feedback operational amplifier in a compact SOT-23-5 package. It features 80MHz bandwidth, fast 30V/µs to 35V/µs slew rate, low 800µA to 900µA supply current, 15mA output drive, 2.7V to 12V supply operation, and fast settling performance. It is well suited for battery-powered instruments, portable electronics, ADC driver circuits, active filters, sensor signal conditioning, video and imaging circuits, communication equipment, industrial embedded systems, and test and measurement applications.

IC ADC 14BIT PIPELINED 196BGA.14 Bit Analog to Digital Converter 2 Input 2 Pipelined 196-BGA-ED (12x12)

IC FANOUT DIST 32LFCSP.Fanout Distribution, Fractional N, Integer N, Clock/Frequency Synthesizer (RF) IC 4.4GHz 1 32-VFQFN Exposed Pad, CSP

90ns, 60ns SPST - NC 24Ohm Analog Switches BREAK-BEFORE-MAKE ADG431 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference

8-Channel, Low Noise, Low Power, 24-Bit, Sigma-Delta ADC with PGA and Reference

IC DDS 12BIT 88LFCSP.Direct Digital Synthesis IC 12 b Tuning 88-LFCSP-VQ (12x12)

Description: General-Purpose Timers, 8-SOIC_N-150_MIL, 8 Pins, -40 to 85C

IC INST AMP 1 CIRCUIT 8SOIC.Instrumentation Amplifier 1 Circuit 8-SOIC

IC OPAMP DIFF 1 CIRCUIT 16LFCSP.Differential Amplifier 1 Circuit Differential 16-LFCSP-VQ (3x3)

IC SW SPST-NO/NCX4 5OHM 16SOIC.4 Circuit IC Switch 1:1 5Ohm 16-SOIC

IC VOLTAGE FEEDBACK 2 CIRC 8SOIC.Voltage Feedback Amplifier 2 Circuit 8-SOIC

8KB 8K x 8 FLASH 8052 8-Bit Microcontroller MicroConverter® ADuC8xx Series ADUC814 28 Pin 16.78MHz 3V 28-TSSOP (0.173, 4.40mm Width)

IC CLOCK GENERATOR 48LFCSP.Clock Generator, Fanout Distribution IC 2.65GHz 1 48-VFQFN Exposed Pad, CSP

IC TRANSMITTER 4-20MA 16-SOIC

8 Terminations 3.3V 8 Pin MAX3075 Receivers 1 Bits 1/1 Drivers/Receivers 1 Functions

Fanout Buffer (Distribution) 4.5GHz Clock Generators 52-WFQFN Exposed Pad Surface Mount 3.15V~3.45V Tube

IC FANOUT DIST 24LFCSP.Fanout Distribution, Integer N Synthesizer (RF) IC 1.8GHz 1 24-WFQFN Exposed Pad, CSP

IC AUDIO PROC 2ADC/4DAC 48-LQFP

Tape & Reel (TR) 10-WFDFN Exposed Pad Controller (PD) 1 -40°C~85°C 40V~60V MAX5969 10 DUAL

IC INTEGER-N/FRACTIONAL 24QFN.Integer-N/Fractional-N IC 8GHz 1 24-VFQFN Exposed Pad

IC HOT SWAP CTRLR GP 32LFCSP.Hot Swap Controller, Monitor 1 Channel General Purpose 32-LFCSP (5x5)