Integrated Circuits - ICs

The XC9306B05G0R-G is a synchronous buck-boost DC/DC converter IC with built-in FETs. The circuit topology switches over between buck and boost smoothly based on the relationship of the input voltage and the output voltage which is observed by the internal PWM controller.

The Cypress W134M/W134S provides the differential clock subsystem for up to 800-MHz data transfer rate signals for a Direct Rambus memory subsystem.

Integrated transceiver ICs for automotive CXPI communication network with flexible bit rate and compliance to JASO, SAE, and ISO standards.

The Cypress S34ML08G1 8-Gb NAND is offered in 3.3 V with x8 I/O interface.

SkyHigh S34ML16G2 16-Gb NAND is offered in 3.3 V with ×8 I/O interface.

8 Gb NAND Flash Memory with x8 I/O interface, 3.3 V operation, for embedded applications.

S34ML01G2, S34ML02G2, S34ML04G2 series 1 Gb, 2 Gb, 4 Gb, 3 V, 4-bit ECC, SLC NAND Flash Memory for Embedded.

3.3-V SLC NAND Flash series with densities of 1 Gb, 2 Gb, and 4 Gb, featuring ×8 or ×16 I/O interface for embedded applications.

The Cypress S34ML08G1 8-Gb NAND is offered in 3.3 V with x8 I/O interface.

8 Gb NAND Flash Memory with x8 I/O interface, 3.3 V operation.

The Cypress S34ML01G1, S34ML02G1, and S34ML04G1 series is offered with a 3.3-V V power supply, and with ×8 or ×16 I/O interface. Its NAND cell provides the most cost-effective solution for the solid state mass storage market.

3.3V NAND Flash Memory series with x8/x16 I/O interface for embedded applications.

128-/64-/32-Mbit (8/4/2M × 16-Bit), 3 V, Flash with Enhanced VersatileIO™

3.0-Volt single-power Flash memory manufactured using 110nm MirrorBit technology.

Cypress S29GL01G/512/256/128P are Mirrorbit® Flash products fabricated on 90 nm process technology with fast page access time of 25 ns and random access time as fast as 90 ns.

The Cypress S29GL01G/512/256/128P are Mirrorbit® Flash products fabricated on 90 nm process technology.

128 Mb (16 MB)/256 Mb (32 MB) FL-S Flash with SPI Multi-I/O, 3.0V

128 Mb (16 MB)/256 Mb (32 MB) FL-S Flash with SPI Multi-I/O, 3.0V

128 Mb (16 MB)/256 Mb (32 MB) FL-S Flash with SPI Multi-I/O, 3.0V

PAL16R8 Family is a 20-pin TTL programmable array logic device family with high-speed performance for replacing conventional SSI/MSI gates and flip-flops.

MB39C605 is a PSR LED driver IC for LED lighting. It delivers regulated current without an opto-coupler in isolated flyback topology.

2-channel power supply IC with one Buck DC/DC converter and one LDO regulator.

The Cypress MB3771 is designed to monitor the voltage level of one or two power supplies (+5 V and an arbitrary voltage) in a microprocessor circuit, memory board in large-size computer, for example.

64-Kbit (8K × 8) Serial (SPI) Automotive F-RAM

HX3 is a family of USB 3.0 hub controllers compliant with the USB3.0 specification revision 1.0.

Infineon’s EZ-USB FX3 is a SuperSpeed peripheral controller, providing integrated and flexible features.

EZ-USB FX3 SuperSpeed USB Controller

EZ-PD™ CCG5 is a dual USB Type-C controller that complies with the latest USB Type-C and PD standards.

EZ-PD™ CCG3PA is Infineon’s highly integrated USB Type-C port controller that complies with the latest USB Type-C and PD standards.

EZ-PD™ CCG3 is a highly integrated USB Type-C controller that complies with the latest USB Type-C and PD standards.

EZ-PD™ CCG3 is a highly integrated USB Type-C controller that complies with the latest USB Type-C and PD standards.

EZ-PD™ CCG2 is a USB Type-C controller that complies with the latest USB Type-C and PD standards.

EZ-PD™ PAG1S is an integrated secondary-side synchronous flyback controller, synchronous rectifier (SR) controller, and charging port controller for USB PD power adapters.

FullFlex™ Synchronous SDR Dual Port SRAM families consist of 2-Mbit, 4-Mbit, 9-Mbit, 18-Mbit, and 36-Mbit synchronous, true dual port static RAMs that are high speed, low power 1.8 V or 1.5 V CMOS.

The EZ-BTTM Module Programming Kit enables you to easily program EZ-BTTM WICED modules prior to manufacturing.

CYAT8168X is a multitouch capacitive touchscreen controller with a 32-bit Arm Cortex CPU for automotive applications.

QFN-16(3x3) Touch Screen Controllers ROHS

TrueTouch™ Single-Touch Capacitive Touchscreen Controller with integrated supervisory circuit and support for up to 44 X/Y sensor inputs.

QFN-24(4x4) Touch Screen Controllers ROHS

QFN-16(3x3) Touch Screen Controllers ROHS

TrueTouch® Multi-Touch All-Points Touchscreen Controller

CapSense Express Controllers with SmartSense Auto-tuning for capacitive touch sensing user interfaces.

The CY8CMBR3xxx CapSense Express controllers enable advanced, yet easy-to-implement, capacitive touch sensing user interface solutions.

20-, 40-, and 60-Bit I/O Expander with EEPROM

The CY8C95xxA is a multi-port I/O expander with on board user available EEPROM and several PWM outputs.

PSoC® 4 is a scalable and reconfigurable platform architecture for a family of mixed-signal programmable embedded system controllers with an Arm® Cortex™-M0 CPU.

PSoC™ 4100S is a member of the PSoC™ 4 platform architecture, based on Arm® Cortex®-M0+ CPU.

PSoC® 4 is a scalable and reconfigurable platform architecture for a family of mixed-signal programmable embedded system controllers with an Arm® Cortex™-M0 CPU.

PSoC 4 is a scalable and reconfigurable platform architecture for a family of programmable embedded system controllers with an Arm Cortex-M0 CPU.

EZ-USB FX2LP USB Microcontroller, a low-power USB 2.0 microcontroller with integrated USB 2.0 transceiver, SIE, and enhanced 8051 microprocessor.