FTDI

The FT121 G-Sensor shield is designed to connect directly to an Arduino Pro development board. The shield allows the micro-controller on the Arduino Pro to access the FT121 USB device controller.

The FTDI Vinco Ethernet, MP3, RTC shield is designed to interface to the FTDI Vinco USB development module and provides a development platform to create interfaces to Ethernet ports, Real Time Clock (RTC) and an Audio Codec using the Vinculum-II.

The VPROG-1 is used to program individual Vinculum Host Controller devices or it can be used to program Vinculum Host Controller devices used on the VDIP1 and VDIP2 (Vinculum VNC1L-1A evaluation boards).

The VPROG-1 is used to program individual Vinculum Host Controller devices or it can be used to program Vinculum Host Controller devices used on the VDIP1 and VDIP2 (Vinculum VNC1L-1A evaluation boards).

VPROG-1 is a programmer for Vinculum Host Controller devices, supporting individual devices and VDIP1/VDIP2 evaluation boards.

Vinco is a development module based on the FTDI Vinculum II, VNC2 dual USB host/slave IC. Vinco is designed as a prototyping platform for VNC2 based designs and applications.

Vinco is a development module based on the FTDI Vinculum II, VNC2 dual USB host/slave IC. Vinco is designed as a prototyping platform for VNC2 based designs and applications.

Vinco is a development module based on the FTDI Vinculum II, VNC2 dual USB host/slave IC. Vinco is designed as a prototyping platform for VNC2 based designs and applications.

Vinco is a development module based on the FTDI Vinculum II, VNC2 dual USB host/slave IC, designed as a prototyping platform for VNC2 based designs and applications.

Vinco is a development module based on the FTDI Vinculum II, VNC2 dual USB host/slave IC. Vinco is designed as a prototyping platform for VNC2 based designs and applications.

Vinco is a development module based on the FTDI Vinculum II, VNC2 dual USB host/slave IC. Vinco is designed as a prototyping platform for VNC2 based designs and applications.

The VNC2 debug module provides connectivity between the Vinculum-II IDE development software and the debug interface pin on the FTDI Vinculum-II (VNC2) USB host controller device.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU and increased processing power.

Vinculum-II is FTDI’s 2nd generation USB Host device with upgraded CPU and increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU and increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU and increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device, upgraded from the previous VNC1L with dramatically increased processing power.

Vinculum-II is FTDI's 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU and increased processing power.

Vinculum-II is FTDI's 2nd generation of USB Host device with upgraded CPU and increased processing power.

Vinculum-II is FTDI's 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU and increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI's 2nd generation USB Host controller IC with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device. The CPU has been upgraded from the previous VNC1L device, dramatically increasing the processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU and increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI's 2nd generation USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device with upgraded CPU for increased processing power.

Vinculum-II is FTDI’s 2nd generation of USB Host device, upgraded from the previous VNC1L with increased processing power and memory.

The VNC1L is a single chip embedded dual USB host controller with advanced features.

Vinculum VNC1L Embedded USB Host Controller IC

The VNC1L is a single chip embedded dual USB host controller with advanced features including two independent USB 2.0 Low-speed/Full speed USB host ports, integrated FTDI proprietary 8/32-bit embedded MCU core, and reconfigurable Flash memory.

VMusic3 is a USB host and MP3/WMA Player application module with an enclosure. The default firmware of the VMusic3 supports audio playback and UART/SPI communications with the embedded USB host controller and USB host port.

The VMusic2 module is a product which not only lets you add USB Flash disk interfacing to your product, but also allows you to play back MP3 and other popular digital music formats directly from a USB flash disk.

The VM810C is a development module for FTDI’s FT810 Embedded Video Engine, which can be accessed with the VM810C. This module behaves as an SPI slave, and requires a SPI Master for proper micro-controller interfacing and system integration.

The VM800C is a development module for FTDI's FT800 Embedded Video Engine (EVE), providing graphic, audio, and touch features.

The VM800C is a development module for FTDI's FT800 Embedded Video Engine, behaving as an SPI slave and requiring an SPI Master for micro-controller interfacing.

The VM800C is a development module for FTDI's FT800 Embedded Video Engine (EVE), providing graphic, audio, and touch features.

Vinco Touch-Key Shield is designed to interface to the FTDI Vinco USB development module to demonstrate how the VNC2 device can enable the Open Accessory Mode in compatible Android devices and transfer data to and from the Android device over USB to allow touch key pad operation.

The VI800A-RELAY is a plug in accessory for the VM800P Plus module, which is used to develop and demonstrate the functionality of the FT800 Embedded Video Engine, EVE. This module behaves as an SPI to relay bridge for the VM800P Plus module.

The VI800A-232U is a plug in accessory for the VM800P module, which expands the VM800P IO capabilities to include RS232. This module behaves as an SPI to RS232 interface bridge on the VM800P Plus module.

The VF2F2 is a reference design for the Vinculum VNC1L. It is designed as a stand alone application which allows for the back up of files from a digital camera onto a USB Flash disk.

VDrive3 is a USB host/microcontroller application module with an enclosure. The default firmware of the VDrive3 supports UART/SPI communications with the embedded USB host controller and USB host port.

VDrive3 is a USB host/microcontroller application module with enclosure, supporting UART/SPI communications.