Embedded Solutions

Power PROFET™ is a benchmark family of ultra-low ohmic protected high-side switches with integrated protection functions and diagnostics for automotive and 12 V industrial markets.

The IRPLLED7 evaluation board is an offline non-isolated constant current Buck regulator LED driver designed to supply a 350mA DC output current.

IRAC1155-300W is a full function AC-DC reference design showcasing the operation of IR1155 PFC IC in a continuous conduction mode boost converter for achieving power factor correction, sub-10% harmonic current distortion and EN61000-3-2 Class D harmonic current limits standard compliance.

ICE2QR0680Z Quasi-resonant CoolSET® for power management applications.

This application note is a description of 28W switching mode power supply evaluation board designed in a quasi resonant flyback converter topology using ICE2QR0665G Quasi-resonant CoolSET®.

Position2Go development kit Infineon XENSIV™ 24GHz radar sensor development kit utilizing BGT24MTR12 RF transceiver and XMC4700 32-bit ARM® Cortex®-M4 MCU series

Distance2Go development kit 24 GHz sensor development kit utilizing Infineon BGT24MTR11 RF transceiver and XMC4200 32-bit ARM® Cortex®-M4 MCU series

Silicon germanium 24GHz radar transceiver MMIC operating from 24.0 GHz to 24.25 GHz.

The TLF51801ELV is a Step-Down controller with external power stage, capable to deliver 10 A or more (depending on Mosfets of external power stage) and adjustable output voltage.

Dual channel high-side PMOS power switch with integrated freewheeling diodes and protection features.

ITS4040D Evaluation Board for 2-channel industrial PROFET with voltage regulator and configuration options.

BGT60TR13C shield, part of Infineon’s XENSIV™ 60 GHz radar system platform.

H-Bridge control software for DC motor control shield with XMC1100 Boot Kit and DAVE.

The Cypress CYW94343WWCD1_EVB kit includes a CYW94343WWCD1 SIP module mounted on a full-featured USB-based evaluation and development board that is fully compatible with the WICED™ Studio.

A full-speed USB-UART low-power bridge controller supporting the 8-pin UART serial interface and USB-IF compliant battery charging detection (BCD) specifications.

The EZ-BT Module Arduino Evaluation Board (CYBT-423028-EVAL) enables you to evaluate and develop applications on the EZ-BT WICED Module, CYBT-423028-02.

The EZ-BT Module Arduino Evaluation Board (CYBT-343026-EVAL) enables evaluation and development on the EZ-BT WICED Module, CYBT-343026-01.

The EZ-BLE PRoC Evaluation Board enables evaluation and development of applications on the EZ-BLE PRoC Module.

The CYBLE-2X20XX-X1 is a Bluetooth Low Energy wireless module solution.

PSoC5LP is a Programmable System-on-Chip™ platform for 8-bit, 16-bit, and 32-bit applications.

PSoC4200M device is a true programmable embedded system-on chip, integrating custom analog and digital peripheral functions, memory, and an ARM® Cortex®-M0 microcontroller on a single chip.

The PSoC® MiniProg3 Program and Debug Kit is an all-in-one programmer for PSoC 1, PSoC 3, PSoC 4, PSoC 5LP, and PSoC6 architectures, a debug tool for PSoC 3, PSoC 4, PSoC 5LP, and PSoC6 architectures, and an USB-I2C Bridge for debugging I2C serial connections and communicating with PSoC devices.

HX3 is a family of USB3.0 hub controller parts compliant to USB 3.0 specification revision 1.0, supporting LS, FS, HS, and SS peripherals.

HX2VL is Infineon’s next generation family of high performance, very low power USB 2.0 hub controllers.

Very low-power USB 2.0 hub controller with up to four downstream ports.

The EZ-USB Development Kit (DVK) is the best starting point for developing an EZ-USB based product.

CY3271-EXP1 Environmental Sensing Kit

CY8C27443 PSoC device for pyroelectric infrared motion sensing.

This document gives a fast introduction to the BTS3xxxTF demoboard, which provides a quick start for lab evaluation of the BTS3xxxTF low side switches.

Demoboard for BTS3xxxEJ low-side switches, enabling quick lab evaluation and prototyping with Arduino/XMC1100 compatibility.

BLDC Shield for Arduino 3-phase motor driver Shield with the TLE9879QXA40 chip

Infineon's Power and Sensing Selection Guide helps customers find optimal semiconductor solutions for diverse applications, featuring advanced power and sensor technologies.

SOFTWARE

USB0010TOBO1.- Dongle

INTERFACE DEVICE.TLE988x, TLE989x - Interface Board

TRUSTMV3SHIELDTOBO1.OPTIGA Trust E Security Interface Platform Evaluation Expansion Board

SECURITYEVAL.- Controller Circuit Protection Evaluation Board

TRUSTMEXPSHIELDTOBO1.Platform Evaluation Expansion Board

EVAL KIT.OPTIGA™ Wireless Power Supply/Charging Power Management Evaluation Board

TPM9673FW2624RPIEBTOBO1.Platform Evaluation Expansion Board

OPTIGA TPM 9673 RPI EVAL.SLB 9673 Trusted Platform Module (TPM) Interface Raspberry Pi Platform Evaluation Expansion Board

TPM9672FW1624RPIEBTOBO1.Platform Evaluation Expansion Board

OPTIGA TPM SLB 9672 RPI EVALUATI.SLB 9672 Trusted Platform Module (TPM) Interface Platform Evaluation Expansion Board

Audio IC Development Tools Evaluation Board for OPTIGA Trusted Platform Module

OPTIGA TPM SLB 9672 PC EVALUATIO.SLB 9672 Security Interface Platform Evaluation Expansion Board

OPTIGA TPM SLB 9672 PC EVALUATIO.SLB 9672 Security Interface Platform Evaluation Expansion Board

EVAL BOARD FOR TLS850F3TUV50.TLS850F3TUV50 OPTIREG™ 1 - Single Channels per IC Positive Fixed Linear Voltage Regulator Evaluation Board

EVAL BOARD FOR TLS850F3TUV33.TLS850F3TUV33 OPTIREG™ 1 - Single Channels per IC Positive Fixed Linear Voltage Regulator Evaluation Board

EVAL BOARD FOR TLS850A4TEV50.TLS850A4TEV50 OPTIREG™ 1 - Single Channels per IC Positive Fixed Linear Voltage Regulator Evaluation Board

EVAL BOARD FOR TLS835B2ELV.TLS835B2ELV OPTIREG™ 1 - Single Channels per IC Positive Adjustable Linear Voltage Regulator Evaluation Board