Embedded Solutions

Design kit for low power point of load solutions with up to 97% efficiency, supporting 600 mA to 1.5 A, low input voltage single and dual channel converters.

The XRP9710 and XRP9711 are programmable step down power modules providing two 6A outputs. The module package contains the switching controller, power MOSFETs, inductors and support components.

The XRP7620 is a multi purpose 4-channel independently adjustable current sink driver.

The XRP7618 is an 8-channel, high voltage, constant-current sink LED driver capable of sinking up to 100mA current per channel.

The XRP7613 is a non-synchronous step down converter with integrated FET optimized to drive high power LEDs at up to 1.2A of continuous current.

The XRP7604 is a non-synchronous voltage mode PWM step down converter with integrated high side FET optimized to drive high power LEDs at up to 1A of continuous current.

The XRP7603 is a non-synchronous voltage mode PWM step down converter with integrated high side FET optimized to drive high power LEDs at up to 2A of continuous current.

The XRP6840 is a controlled-current dual-cell supercapacitor charger and high power LED driver.

The XRP6274 is an ultra low dropout voltage regulator capable of delivering 2A output currents.

Single/Dual Channel USB Power Distribution Switch

Single/Dual Channel USB Power Distribution Switch, compliant with USB 3.0 specification for self or bus powered USB applications.

The XRD98L61 is a complete, low power CCD Image Digitizer for digital motion and still cameras.

The XRD9827 is a complete linear CIS or CCD sensor AC coupled similar to the CCD configuration.

16-bit SPI GPIO expander with integrated level shifters.

8-bit GPIO expander with SPI interface and internal pull-up resistors.

16-bit SPI GPIO expander with reset input

The XRA1403 is a 16-bit GPIO expander with an SPI interface, featuring internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

8-bit SPI GPIO expander with internal pull-up resistors and SPI interface.

The XRA1402 is an 8-bit GPIO expander with an SPI interface. After power-up, the XRA1402 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

XR82C684

The XR77103-G1R2 universal PMIC features three 2A capable, high-efficiency synchronous buck regulators with integrated power switches.

AEC-Q100 qualified 40V, 3A/5A/8A synchronous step-down regulators with integrated controller, drivers, bootstrap diode and MOSFETs for point-of-load supplies.

The XR5R921 is a High Definition Composite Video Interface (HDCVI) compliant, four channel, single-lane PCIe DVR add-in card.

The XR5R921 is a High Definition Composite Video Interface (HDCVI) compliant, four channel, single-lane PCIe DVR add-in card. It features two S7100 video processors, and can capture four high definition HDCVI streams, demodulate and compress them using the Exar H.264 high profile Advanced Video CODEC (AVC) encoder to produce the surveillance industry’s best high-definition video quality.

High performance RS-485/RS-422 transceivers designed for improved performance in noisy industrial environments and increased tolerance to system faults.

High performance RS-485/RS-422 transceivers designed for improved performance in noisy industrial environments and increased tolerance to system faults.

High performance RS-485/RS-422 transceivers designed for improved performance in noisy industrial environments and increased tolerance to system faults.

The XR33152, XR33155, XR33156 and XR33158 (XR3315x) family of high performance RS-485/RS-422 devices are designed for improved performance in noisy industrial environments and increased tolerance to system faults.

The XR33152, XR33155, XR33156 and XR33158 (XR3315x) family of high performance RS-485/RS-422 devices are designed for improved performance in noisy industrial environments and increased tolerance to system faults.

The XR33052, XR33053, XR33055, and XR33058 (XR3305x) are a family of high performance RS-485/RS-422 devices designed for improved performance in noisy industrial environments and increased tolerance to system faults.

The XR33052, XR33053, XR33055, and XR33058 (XR3305x) are a family of high performance RS-485/RS-422 devices designed for improved performance in noisy industrial environments and increased tolerance to system faults.

The XR33052, XR33053, XR33055, and XR33058 (XR3305x) are a family of high performance RS-485/RS-422 devices designed for improved performance in noisy industrial environments and increased tolerance to system faults.

Advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards with 15kV ESD protection.

The XR31233, XR31234 and XR31235 are controller area network (CAN) transceivers that conform to the ISO 11898 standard. Each provides transmit and receive signaling rates up to 1Mbps between a differential CAN bus and a CAN controller.

The XR31233, XR31234 and XR31235 are controller area network (CAN) transceivers that conform to the ISO 11898 standard. Each provides transmit and receive signaling rates up to 1Mbps between a differential CAN bus and a CAN controller.

±36V Fault Tolerant, Single 3.3V CAN Bus Transceivers with up to 1Mbps data rates.

XR22417 is a USB 2.0 7-port hub using Multiple Transaction Translators (MTT) for highest possible bandwidth capability.

XR22417 is a USB 2.0 7-port hub using Multiple Transaction Translators (MTT) for highest possible bandwidth capability.

The XR22414 is a USB 2.0 4-port hub using multiple transaction translators (MTT) for highest possible bandwidth capability.

USB 2.0 4-port hub using multiple transaction translators (MTT) for highest possible bandwidth capability.

USB 2.0 4-port hub with a Single Transaction Translator (STT).

XR22404 is a USB 2.0 4-port hub with a Single Transaction Translator (STT).

The XR21V1414 (V1414) is an enhanced 4-channel USB 2.0 Compliant, Full-speed (12 Mbps) USB Universal Asynchronous Receiver and Transmitter (UART).

The XR21V1412 is an enhanced 2-channel USB 2.0 Compliant, Full-Speed (12 Mbps) Universal Asynchronous Receiver and Transmitter (UART) with a USB interface.

Enhanced 1-Ch Full-Speed USB HID to UART Bridge

The XR20M1172 is a high performance two channel universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs and a selectable I2C/SPI slave interface.

A high performance two channel universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs and a selectable I2C/SPI slave interface.

A high performance two channel universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs and a selectable I2C/SPI slave interface.

The XR20M1170 (M1170) is a high performance universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs and a selectable I2C/SPI slave interface.

The XR1009 (single) and XR2009 (dual) are ultra-low power, low cost, voltage feedback amplifiers.