Power Management ICs

The XRP7708 and XRP7740 are quad-output pulse-width modulated (PWM) step-down DC-DC controllers with a built-in LDO for standby power and GPIOs.

The XRP7714 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7714 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP7714 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs. The device provides a complete power management solution in one IC and is fully programmable via an I2C serial interface.

The XRP7714 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The XRP6272 is a low dropout voltage regulator capable of a constant output current up to 2 Amps. A wide 1.8V to 6V input voltage range allows for single supply operations from industry standard 1.8V, 2.8V, 3.3V, and 5V power rails as well as the 5.8V rail.

The XRP6272 is a low dropout voltage regulator capable of a constant output current up to 2 Amps with a wide 1.8V to 6V input voltage range.

The XRP6141 is a synchronous step-down controller for point-of load supplies up to 35A with a wide 4.5V to 22V input voltage range.

The XRP2997 is a Double Data Rate (DDR) termination voltage regulator supporting all power requirements of DDR I, II, III and IV memories and is capable of sinking or sourcing 2A continuously.

The XRP2527 and XRP2528 devices are respectively single and dual channel integrated high-side power distribution switches with independent enables, fault flags and precise programmable current limit thresholds.

The XRP2527 and XRP2528 devices are respectively single and dual channel integrated high-side power distribution switches with independent enables, fault flags and precise programmable current limit thresholds.

The XRP2525 and XRP2526 devices are respectively single and dual channel integrated high-side power distribution switches with independent enables and fault flags.

Single/Dual Channel USB 3.0 Power Distribution Switch

The XRP2525 and XRP2526 devices are respectively single and dual channel integrated high-side power distribution switches with independent enables and fault flags.

The XR79120 is a 20A synchronous step-down Power Module for point-of-load supplies with a wide 4.5V to 22V input voltage range.

The XR77XXEVB-XCM-V80 (Configuration Module or XCM) is a board that is designed to act as a USB to I2C bridge for communication between a PC running PowerArchitectTM 4 configuration and design software and one of MaxLinear’s Universal PMICs.

The XR77103-G1R2 universal PMIC features three 2A capable, high-efficiency synchronous buck regulators with integrated power switches.

XR77103-A1R0 Universal PMIC 3-Output Buck Regulator

XR77103-A0R5 is a universal PMIC with three 2A synchronous buck regulators.

XR77103 Universal PMIC with three high-efficiency, wide input range, synchronous buck converters.

XR77103 Universal PMIC with three high efficiency, wide input range, synchronous buck converters.

Synchronous step-down regulators combining controller, drivers, bootstrap diode and MOSFETs in a single package for point-of-load supplies with load current ratings of 3A, 5A, and 8A.

Synchronous step-down regulators combining controller, drivers, bootstrap diode and MOSFETs in a single package, rated for 3A, 5A, and 8A load currents.

The XR76203, XR76205 and XR76208 are synchronous step-down regulators combining the controller, drivers, bootstrap diode and MOSFETs in a single package for point-of-load supplies.

The XR76203, XR76205 and XR76208 are synchronous step-down regulators combining the controller, drivers, bootstrap diode and MOSFETs in a single package for point-of-load supplies.

15A Synchronous Step Down COT Regulator with integrated controller, drivers, bootstrap diode and MOSFETs in a single package for point-of-load supplies.

Synchronous step-down regulators combining controller, drivers, bootstrap diode and MOSFETs in a single package for point-of-load supplies. 8A and 12A load current ratings.

The XR76108 and XR76112 are synchronous step-down regulators combining the controller, drivers, bootstrap diode and MOSFETs in a single package for point-of-load supplies. The XR76108 has a load current rating of 8A and the XR76112 has a load current rating of 12A.

The SPX5205 is a positive voltage regulator with very low dropout voltage, output noise and ground current.

The SPX5205 is a positive voltage regulator with very low dropout voltage, output noise and ground current.

SPX5205 is a positive voltage regulator with very low dropout voltage, output noise and ground current.

The SPX5205 is a positive voltage regulator with very low dropout voltage, output noise and ground current.

The SPX5205 is a positive voltage regulator with very low dropout voltage, output noise and ground current.

The SPX5205 is a positive voltage regulator with very low dropout voltage, output noise and ground current.

3-terminal adjustable shunt voltage regulator with 1.24V bandgap reference and 0.5% tolerance.

The SPX432 is a 3-terminal adjustable shunt voltage regulator providing a highly accurate 1.24V bandgap reference with 0.5% tolerance.

The SPX432 is a 3-terminal adjustable shunt voltage regulator providing a highly accurate 1.24V bandgap reference with 0.5% tolerance.

The SPX431L is a 3-terminal adjustable shunt voltage regulator providing a highly accurate bandgap reference.

The SPX431 is a three-terminal adjustable shunt voltage regulator providing a highly accurate bandgap reference. The SPX431 acts as an open-loop error amplifier with a 2.5V temperature compensation reference.

The SPX431 is a three-terminal adjustable shunt voltage regulator providing a highly accurate bandgap reference.

The SPX431 is a three-terminal adjustable shunt voltage regulator providing a highly accurate bandgap reference.

The SPX431 is a three-terminal adjustable shunt voltage regulator providing a highly accurate bandgap reference. The SPX431 acts as an open-loop error amplifier with a 2.5V temperature compensation reference.

The SPX431 is a three-terminal adjustable shunt voltage regulator providing a highly accurate bandgap reference. The SPX431 acts as an open-loop error amplifier with a 2.5V temperature compensation reference.

The SPX431 is a three-terminal adjustable shunt voltage regulator providing a highly accurate bandgap reference. The SPX431 acts as an open-loop error amplifier with a 2.5V temperature compensation reference.

The SPX3940 is a 1A, accurate voltage regulator with a low drop out voltage of 280mV (typical) at 1A.

The SPX3940 is a 1A, accurate voltage regulator with a low drop out voltage of 280mV (typical) at 1A.

The SPX3940 is a 1A, accurate voltage regulator with a low drop out voltage of 280mV (typical) at 1A. These regulators are specifically designed for low voltage applications that require a low dropout voltage and a fast transient response.

The SPX3940 is a 1A, accurate voltage regulator with a low drop out voltage of 280mV (typical) at 1A. These regulators are specifically designed for low voltage applications that require a low dropout voltage and a fast transient response.

The SPX3940 is a 1A, accurate voltage regulator with a low drop out voltage of 280mV (typical) at 1A. These regulators are specifically designed for low voltage applications that require a low dropout voltage and a fast transient response.

The SPX3940 is a 1A, accurate voltage regulator with a low drop out voltage of 280mV (typical) at 1A. These regulators are specifically designed for low voltage applications that require a low dropout voltage and a fast transient response.