Interface ICs

The WinPath3, with its enhanced carrier-grade software, is the third generation of WinPath products. Building on hundreds of successful communications systems deployments, the WinPath3 extends PMC’s proven formula of complete protocol solutions to a significantly higher level of performance.

VSC8558 Octal 10/100/1000BASE-T PHY with Dual 1.25 Gbps SerDes

Dual channel SerDes PHY with hardware-based KR support for timing-critical applications.

The VSC7323 (Meigs™-IIe) is a versatile building block for a range of high-density Gigabit Ethernet (GbE) and 10 GbE applications within the Enterprise, Metro, and Core.

The VSC3104 is a 4x4 Crosspoint Switch with Integrated Equalization. The VSC3108 is a 8x8 Crosspoint Switch with Integrated Equalization.

The VSC3108 is an 8x8 asynchronous crosspoint switch designed to carry broadband data streams.

The VSC3104 is a 4x4 Crosspoint Switch with Integrated Equalization. The VSC3108 is a 8x8 Crosspoint Switch with Integrated Equalization.

The USB3311 is a highly integrated Hi-Speed USB 2.0 Transceiver (PHY) that supports systems architectures based on a 26MHz reference clock.

2-Port USB 2.0 Hub Controller compliant with USB 2.0 Specification, supporting High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps) operation.

The Microchip USB2250/50i/51/51i is a USB 2.0 compliant, Hi-Speed mass storage class peripheral controller intended for reading and writing to more than 24 popular flash media formats from the CompactFlash® (CF), SmartMediaTM (SM), xD-Picture CardTM (xD)1, Memory Stick® (MS), Secure Digital (SD), and MultiMediaCardTM (MMC) families.

The hex driver IC U6805B includes 6 non-inverted and current-limited output stages with an open collector.

The microcontroller-controlled telephone circuit U4090B-P is a linear integrated circuit for use in feature phones, answering machines and fax machines.

Fusion is the world's first mixed signal FPGA family, integrating analog, flash memory, and FPGA fabric in a monolithic device.

High Performance 8-bit Microcontrollers with extended ROM/EPROM capacity and low power consumption.

High Performance 8-bit Microcontrollers with fully static design for low power consumption.

CMOS charge-pump voltage converters in 5-Pin SOT-23 packages that invert and/or double input voltage from +1.5V to +5.5V.

The TCM828/TCM829 devices are CMOS 'charge-pump' voltage converters in ultra-small, 5-Pin SOT-23 packages. They invert and/or double an input voltage which can range from +1.5V to +5.5V.

The TC7136 and TC7136A are low power, 3-1/2 digit liquid crystal display (LCD) drivers and analog-to-digital converters.

The TC520A serial interface adapter provides logic control for Microchip's TC500/TC500A/TC510/TC514 family of dual slope, integrating A/D converters.

Improved versions of the earlier TC426/TC427/TC428 family of MOSFET drivers with matched rise and fall times.

The TC1426/TC1427/TC1428 are a family of 1.2A dual high-speed MOSFET drivers. CMOS fabrication is used for low-power consumption and high efficiency.

T89C51RD2 is high performance CMOS Flash version of the 80C51 CMOS single chip 8-bit microcontroller. It contains a 64 Kbytes Flash memory block for program and for data.

The T6817 is a fully protected driver interface designed in 0.8-µm BCDMOS technology. It can be used to control up to 6 different loads by a microcontroller in automotive and industrial applications.

The T6817 is a fully protected driver interface designed in 0.8-µm BCDMOS technology. It can be used to control up to 6 different loads by a microcontroller in automotive and industrial applications.

The T6817 is a fully protected driver interface designed in 0.8-µm BCDMOS technology. It can be used to control up to 6 different loads by a microcontroller in automotive and industrial applications.

A TTL/CMOS-to-differential PECL translator capable of running from 3.3V or 5V supply, with DC-to-800MHz frequency and low jitter performance.

3.3V/5V 2.5GHz Precision Edge® PECL/ECL Differential Receiver/Buffer

The SY89250V is a differential PECL/ECL receiver/buffer.

The SY89206V is a 3.3V/5V 1 GHz differential PECL/ECL receiver/buffer in a space-saving 2mm x 2mm DFN package.

The SY88927V is a 2.5Gbps high-speed differential receiver.

The SY88808L high-speed transceiver is optimized for active copper cable assembly, backplane, and Precision Edge® transmission line data-path management applications. The SY88808L is capable of equalizing serial data up to 10.3Gbps across up to 36 inches of FR4 or 10 meters of 26 AWG cable.

The SY88808L high-speed transceiver is optimized for active copper cable assembly, backplane, and Precision Edge® transmission line data-path management applications. It is capable of equalizing serial data up to 10.3Gbps across up to 36 inches of FR4 or 10 meters of 26 AWG cable.

The SY87724L is a complete serial data multiplexer and demultiplexer, capable of operating at up to 2.7GHz. The device provides for muxing and demuxing to 4, 5, 8, or 10 bit wide buses.

The SY58602U is a 2.5V/3.3V precision, high-speed differential receiver capable of handling clocks up to 7GHz and data streams up to 10.7Gbps.

The SY54020AR is a fully differential, low voltage 1.2V/1.8V/2.5V CML 1:4 Fanout Buffer with active-low Precision Edge® Enable (/EN).

The SY54011R is a fully differential, low-voltage 1.2V/1.8V CML 1:2 fanout buffer.

The SY54011R is a fully differential, low-voltage 1.2V/1.8V CML 1:2 fanout buffer optimized to provide two identical output copies with less than 15ps of skew and 50fs of typical additive phase jitter.

The SY10/100H607 are 6-bit, registered, dual supply PECL-to-TTL translators.

6-bit, registered, dual supply PECL-to-TTL translators.

The SY10/100EPT28L is a differential LVPECL-to-LVTTL translator and a LVTTL-to-differential LVPECL translator in a single package.

The SY10/100EPT28L is a differential LVPECL-to-LVTTL translator and a LVTTL-to-differential LVPECL translator in a single package.

The SY10/100EPT28L is a differential LVPECL-to-LVTTL translator and a LVTTL-to-differential LVPECL translator in a single package.

A differential LVPECL-to-LVTTL translator and a LVTTL-to-differential LVPECL translator in a single package.

The SY10/100EPT20V is a TTL/CMOS to differential PECL translator capable of running from 3.3V or 5V supply.

The SY10EP89V is a differential fanout gate specifically designed to drive coaxial cables.

The SY10EP89V is a differential fanout gate specifically designed to drive coaxial cables.

The SY10EP89V is a differential fanout gate specifically designed to drive coaxial cables.

The SY10EP89V is a differential fanout gate specifically designed to drive coaxial cables.

The SY10EP89V is a differential fanout gate specifically designed to drive coaxial cables.

The SY10EP89V is a differential fanout gate specifically designed to drive coaxial cables.