Power

The UCS2113 is a dual USB port power switch with 2.9V to 5.5V source voltage range, providing 3.0A continuous current per port with precision overcurrent limiting, auto-recovery fault handling, and SMBus/I2C communications.

The TC1303/TC1304 combines a 500mA synchronous buck regulator and 300mA Low-Dropout Regulator (LDO) with a power-good monitor to provide a highly integrated solution for devices that require multiple supply voltages.

The T6818/ATA6828 are fully protected driver interfaces designed in 0.8-µm BCD-MOS technology. They are used to control up to 3 different loads by a microcontroller in automotive and industrial applications.

Fully protected driver interfaces designed in 0.8-µm BCDMOS technology for controlling up to 3 loads in automotive and industrial applications.

The T6818/T6828 are fully protected driver interfaces designed in 0.8-µm BCDMOS technology. They are used to control up to 3 different loads by a microcontroller in automotive and industrial applications.

The SG79xxA/SG79xx series of negative regulators offer self-contained, fixed-voltage capability with up to 1.5A of load current and input voltage up to -30V.

The SG1525A/1527A series of pulse width modulator integrated circuits are designed to offer improved performance and lower external parts count when used to implement all types of switching power supplies.

This monolithic integrated circuit contains all the control circuitry for a regulating power supply inverter or switching regulator. Included in a 16-pin dual-in-line package is the voltage reference, error amplifier, oscillator, pulse width modulator, pulse steering flip-flop, dual alternating output switches, and current-limiting and shut-down circuitry.

Microchip's PD-96xx-GC family is a multiport solution with 6, 12 or 24 ports for remote powering of current as well as emerging high-power applications.

Multi-port IEEE 802.3bt-compliant 90W PoE midspan family with network management.

Microchip's PD-9600GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications.

Microchip's PD-9600GC family is a 6, 12 and 24 multiport solution for remote powering of high power applications, providing 90W per port for devices like IEEE 802.11 access points, PTZ cameras, and thin clients.

Microchip's PD-96xx-GC family is a multiport solution with 6, 12 or 24 ports for remote powering of current as well as emerging high-power applications.

Microchip's PD-9600GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications. The PD-9600GC is designed specifically to power IEEE 802.11 access points, Pan-Tilt-Zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals with 90W of power.

Microchip's PD-96xx-GC family is a multiport solution with 6, 12 or 24 ports for remote powering of current as well as emerging high-power applications.

Microchip's PD-9600GC family is a multiport PoE midspan solution providing 90W per port for high-power devices.

9600G PoH/PoE 95 W/Port Gigabit Midspan Family for High Power Terminals

9600G PoH/PoE 95 W/Port Gigabit Midspan Family for High Power Terminals

9600G PoH/PoE 95 W/Port Gigabit Midspan Family for High Power Terminals

Microchip's PD-96xx-GC family is a multiport solution with 6, 12 or 24 ports for remote powering of current as well as emerging high-power applications.

Microchip's PD-9600GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications.

Microchip's PD-9600GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications.

Microchip's PD-9600GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications.

9600G PoH/PoE is a 95 W per port Gigabit Midspan family for high power terminals.

9600G PoH/PoE 95 W/Port Gigabit Midspan Family for High Power Terminals

Microsemi provides reliable and scalable PoE solutions including midspan injectors and switches for indoor and outdoor deployments.

Microchip’s PD-9500GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications.

Microchip's PD-9500GC family is a 6, 12, and 24 multiport solution for remote powering of high-power devices with 60W per port.

Microchip’s PD-9500GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications.

Microchip’s PD-9500GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications. The PD-9500GC is designed specifically to power IEEE 802.11 access points, Pan-Tilt-Zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals with 60W of power.

Microchip’s PD-9500GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications.

PD-9500G EEPoE family is designed to power network devices such as IP cameras, access control systems, thin clients, and other Ethernet powered devices, reducing power losses by almost 3W per link for 25.5W devices. It delivers power over all 4 pairs of Cat 5 or better cable, dissipating 50% less power than PoE switches and 2-pair Midspans, while complying with IEEE802.3at-2009.

PD-9500G EEPoE Midspan family for high power terminals, delivering up to 72W per port over 4 pairs with reduced power dissipation.

The PD-9500G EEPoE Midspan family is designed to power network devices like IP cameras and thin clients with up to 51W, reducing power losses by 3W per link, and delivers power over all 4 pairs of Cat 5+ cable, dissipating 50% less power than traditional PoE, while complying with IEEE802.3at-2009.

Microchip’s PD-9500GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications.

The PD-9500G EEPoE Midspan family delivers up to 72W per port over 4-pairs, reducing power dissipation and complying with IEEE 802.3at-2009.

Microsemi’s PD-9500G EEPoE Midspan family provides high-power PoE over 4 pairs, delivering up to 72W per port with reduced power dissipation and full compliance with IEEE 802.3at-2009.

Microchip’s PD-9500GC family is 6, 12 and 24 multiport solution for remote powering of current as well as emerging high power applications.

Microsemi’s PD-9500G EEPoE family is designed to power network devices such as IP cameras, access control systems, thin clients and other Ethernet powered devices (PD) that require up to 51W, while reducing power losses by almost 3W per link for 25.5W devices.

PoE is a revolutionary technology that eliminates the need for electric power infrastructure, enabling quick and easy installation of powered devices (PDs) such as IP telephones, security cameras, and other IP-based devices.

Single-port, 60W Gigabit Midspan, 4-Pairs, 802.3at Compliant

Microsemi single and multiport midspans are an economical and easy way to power popular devices such as WLAN access points, IP video phones, IP security cameras, security access devices, thin clients and printers over new or existing Ethernet infrastructure.

Microsemi single and multiport midspans are an economical and easy way to power popular devices such as WLAN access points, IP video phones, IP security cameras, security access devices, thin clients and printers over new or existing Ethernet infrastructure. Microsemi PoE Midspans provide easy, low-cost power over new and existing Ethernet infrastructure.

Microsemi’s PD-9000G Family is designed specifically to power IEEE 802.11n and IEEE 802.3at access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals.

Microchip’s PD-9001GI is a single-port, high-power solution for remote powering of current and emerging high-power applications. Generating up to 30W, the 9001GI enables remote power for a new range of applications including 802.11n access points, Pan-Tilt Zoom (PTZ) cameras and other IP terminals.

Microsemi’s PD-6500G family sets a new standard for highly secure, intelligent, remotely-managed and safe-to-use PoE.

Microsemi’s PD-6500G family sets a new standard for highly secure, intelligent, remotely-managed and safe-to-use PoE.

Business-class Midspan Family with Network Management System and Lifetime Warranty

Business-class Midspan Family with Network Management System and Lifetime Warranty, setting a new standard for highly secure, intelligent, remotely-managed and safe-to-use PoE.

Microsemi’s PD-6500G family sets a new standard for highly secure, intelligent, remotely-managed and safe-to-use PoE. The PD-6500G family includes 6, 12, and 24-port models, making an even wider range of flexible Power over Ethernet installations possible.