NEXPERIA

The PBSS5140T,215 is a Nexperia 40V 1A PNP low VCEsat BISS bipolar transistor designed for efficient switching applications in automotive, industrial, and portable electronics. Featuring low collector-emitter saturation voltage, 1A collector current capability, high DC current gain at high current levels, 150MHz transition frequency, and a compact SOT23 (TO-236AB) surface-mount package, the Nexperia PBSS5140T,215 provides a reliable transistor solution for general-purpose switching, supply-line control, LCD backlighting, battery-powered equipment, LED drivers, and compact embedded electronic systems.

The PESD3V3L1BSFYL is a Nexperia ultra-low clamping bidirectional ESD protection diode designed to protect sensitive signal lines from electrostatic discharge, electrical fast transients, and surge events. Featuring a 3.3V reverse stand-off voltage, ±30kV ESD protection, 20A peak pulse surge capability, ultra-low 1nA leakage current, 5.6V typical clamping voltage, low parasitic capacitance, and an ultra-small DSN0603-2 (SOD962) surface-mount package, the Nexperia PESD3V3L1BSFYL provides a compact and reliable protection solution for telecom interfaces, portable electronics, communication systems, IoT devices, computing equipment, and high-density embedded applications.

The PMEG100T100ELPE-QZ is a Nexperia 100V 10A Trench MEGA Schottky barrier rectifier diode designed for high-efficiency power conversion and protection applications. Featuring 100V reverse voltage capability, 10A average forward current, low forward voltage drop, low reverse leakage current, fast switching characteristics, high surge current capability, and a compact CFP15B (SOT1289B) power SMD package, the Nexperia PMEG100T100ELPE-QZ is ideal for automotive LED lighting, DC/DC converters, switch-mode power supplies, freewheeling circuits, reverse polarity protection, OR-ing applications, and industrial power management systems.

The IP4220CZ6 is a Nexperia integrated ESD protection device designed for high-speed interface protection applications including USB 2.0, Ethernet, DVI, HDMI, and IEEE1394 systems. Featuring four pairs of ultra-low capacitance rail-to-rail ESD protection diodes, an integrated Zener clamp structure, ±8kV IEC 61000-4-2 Level 4 contact discharge protection, approximately 1pF input capacitance, and a compact 6-lead SOT457 surface-mount package, the Nexperia IP4220CZ6 provides a reliable and space-efficient protection solution for consumer electronics, communication equipment, portable devices, and embedded systems requiring strong ESD immunity while maintaining high-speed signal integrity. Nexperia

BAT74 is a Nexperia Schottky barrier double diode integrating two electrically isolated Schottky diodes in a compact SOT143B surface-mount package. It features low forward voltage, fast switching performance, 30V reverse voltage rating, 200mA current capability per diode, integrated guard-ring stress protection, and automotive qualification. It is suitable for high-speed switching, signal clamping, line termination, signal steering, automotive electronics, communication equipment, consumer electronics, industrial control boards, and compact low-voltage protection circuits.

PESD1LIN,115 is a Nexperia LIN-bus ESD protection diode in a compact SOD323 package, designed to protect one automotive LIN bus line from ESD, surge pulses, and other transient events. It features an asymmetrical diode configuration, 160W peak pulse power capability, 40V clamping voltage at 1A, ultra-low leakage current below 1nA, ESD protection up to 23kV, IEC 61000-4-2 Level 4 and IEC 61000-4-5 compliance, and AEC-Q101 automotive qualification. It is suitable for LIN interfaces, automotive ECUs, body control modules, sensor nodes, actuator nodes, and other in-vehicle communication systems.

Description: Inverter, HCT Series, 6-Func, 1-Input, CMOS, PDSO14

2.3V~3.6V 74CBTLV3257 Signal switch 74CBTLV Series

Ultra low capacitance double rail-to-rail ESD protection diode

60 V, 5.7 A PNP low VCEsat transistor PNP low VCEsat transistor in a SOT223 (SC-73) medium power Surface-Mounted Device (SMD) plastic package. NPN complement: PBSS4041NZ

TVS DIODE 24VWM 42VC TO236AB.42V Clamp 3A (8/20µs) Ipp Tvs Diode Surface Mount TO-236AB

Description: Trans Voltage Suppressor Diode

PESD2ETH-AX - Ultra low capacitance double rail-to-rail ESD protection diode

DIODE ARRAY GP 60V 200MA SOT143B.Diode Array 2 Independent 60 V 200mA (DC) Surface Mount TO-253-4, TO-253AA

MOSFET (Metal Oxide) N-Channel 2.2mOhm @ 25A, 10V ±20V 17200 pF @ 50 V 160 nC @ 10 V 100 V SOT-1235

MOSFET (Metal Oxide) N-Channel Cut Tape (CT) 32m ? @ 4.2A, 4.5V ±12V 655pF @ 10V 11nC @ 4.5V TO-236-3, SC-59, SOT-23-3

Schottky Diode Rectifier Fast Recovery =< 500ns, > 200mA (Io) 530mV @ 2A 150°C Max 150?A @ 60V Tape & Reel (TR) SOD-123W Surface Mount

TRANS NPN 80V 1A SOT-89.Bipolar (BJT) Transistor NPN 80 V 1 A 180MHz 1.25 W Surface Mount SOT-89

TRANS NPN 80V 1A SOT-223.Bipolar (BJT) Transistor NPN 80 V 1 A 155MHz 600 mW Surface Mount SOT-223

500mΩ 2:1 TSSOP-16 Analog Switches, Multiplexers, Demultiplexers ROHS

1 SPDT XSON-6(1x1) Analog Switches, Multiplexers, Demultiplexers ROHS

XSON-6(1x1.5) Analog Switches, Multiplexers ROHS

500mΩ 1 2:1 XSON-6(1x1) Analog Switches, Multiplexers, Demultiplexers ROHS

500mΩ 2 2:1 XSON-6(1x1.5) Analog Switches, Multiplexers, Demultiplexers RoHS

US3M/SOD1003/SMC.Diode 1000 V 3A Surface Mount SMC

US1M/SOD1001/SMA.Diode 1000 V 1A Surface Mount SMA

500mW 5.6V SOD-323F Single Zener Diodes ROHS

SOD-323 Zener Diodes ROHS

40mA 6V~6.5V 275nm LED Emitters - Infrared, UV, Visible RoHS

Microcontrollers (MCU/MPU/SOC) ROHS

Schottky Diodes & Rectifiers 40 V, 3 A low VF Schottky barrier rectifier

Schottky Diodes & Rectifiers 30 V, 2 A low VF Schottky barrier rectifier

Schottky Diodes & Rectifiers 30 V, 1 A low VF Schottky barrier rectifier

MOSFETs ROHS