Amplifier ICs

2 · 40 W/2 W stereo BTL car radio power amplifier with differential inputs and diagnostic outputs

2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing

2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing

2x8W stereo BTL audio output amplifier with DC volume control.

The TDA7056A is a mono BTL output amplifier with DC volume control. It is designed for use in TV and monitors, but also suitable for battery-fed portable recorders and radios.

The TDA6120Q is a single 32MHz, 125V(p-p) video output amplifier contained in a plastic DIL-bent-SIL power package. The device uses high-voltage DMOS technology and is intended to drive the cathodes of a CRT in High Definition TVs (HDTVs) or monitors.

14-bit SSTL_2 registered driver with differential clock inputs, designed to operate between 2.3 V and 2.7 V.

SSTUA32866 1.8 V 25-bit 1 : 1 or 14-bit 1 : 2 configurable registered buffer with parity for DDR2-667 RDIMM applications

Matched dual high-performance low-voltage operational amplifier with rail-to-rail input and output operation.

Matched dual high-performance low-voltage operational amplifier with rail-to-rail input and output operation.

The SA5219 represents a breakthrough in monolithic amplifier design featuring several innovations. This unique design has combined the advantages of a high speed bipolar process with the proven Gilbert architecture.

The SA5217 is a 75MHz postamplifier system designed to accept low level high-speed signals, converting them into TTL levels at the output.

Matched quad high-performance low-voltage operational amplifier

Quad 2-input NAND buffer (open collector)

Hex buffer/driver 74F367

Octal buffers (3-State) 74F244/74F244B for bus interface applications.

Octal inverting buffer (3-state)

Quad buffers (3-State) 74F125, 74F126

74F125 provides four non-inverting buffer/line drivers with 3-state outputs.

Quad buffers with 3-state outputs.

Hex inverter/buffer drivers (open-collector) 74F07

Xtrinsic MMA52xxAKW PSI5 Inertial Sensor, a SafeAssure solution with PSI5 Version 1.3 compatibility and overdamped X-axis satellite accelerometers.

The MMA series of silicon capacitive, micromachined accelerometers features signal conditioning, a 4-pole low pass filter and temperature compensation.

The GTL2034 is a 4-bit GTL- /GTL/GTL+ bus buffer.

Hybrid CATV amplifier module in a SOT115J package operating with a 24V DC supply.

The BGY885B is a hybrid amplifier module designed for CATV systems operating over a frequency range of 40 to 860MHz at a voltage supply of 24V(DC).

The NCX2220 provides a dual low voltage low power comparator. The NCX2220 has a very low supply current of 5 μA per comparator and is guaranteed to operate at a low voltage of 1.3 V.

High dynamic range optical receiver amplifier modules in a standard SOT115 package, 870 MHz optical receivers.

870 MHz optical receivers with high dynamic range, standard SOT115 package, and 24V DC supply.

High dynamic range optical receiver amplifier modules in a standard SOT115 package. The amplifier supply voltage pin and the photo diode bias voltage pin both connect to 24V(DC).

High dynamic range optical receiver amplifier modules in a standard SOT115 package where the non-jacketed fiber has either no connector or has an FC/APC or SC/APC connector.

High dynamic range optical receiver amplifier modules in a standard SOT115 package with 24V DC supply.

870 MHz optical receivers. High dynamic range optical receiver amplifier modules in a standard SOT115 package.

870 MHz optical receivers with high dynamic range, standard SOT115 package, 24V DC supply.

860 MHz, 20 dB gain power doubler amplifier

Hybrid amplifier module in a SOT115J package operating with a supply voltage of 24V. 860 MHz, 18.5 dB gain power doubler amplifier.

3.3 V 16-bit buffer/driver with 3-state outputs. High-performance BiCMOS product.

The 74LVC126A consists of four non-inverting buffers/line drivers with 3-state outputs, which are controlled by the output enable input (nOE).

The 74LV541 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC541 and 74HCT541. It features octal non-inverting buffer/line drivers with 3-state outputs.

The 74LV541 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC541 and 74HCT541. It features octal non-inverting buffer/line drivers with 3-state outputs controlled by OE1 and OE2.

The 74LV367 is a low-voltage CMOS hex non-inverting buffer/line driver with 3-State outputs, pin and function compatible with 74HC/HCT367.

The 74LV244 is an 8-bit buffer/line driver with 3-state outputs.

The 74LV241 is a low-voltage, Si-gate CMOS device and is pin and function compatible with 74HC241 and 74HCT241. It is an octal non-inverting buffer/line driver with 3-state outputs.

Octal buffer/line driver; 3-state. Low-voltage Si-gate CMOS device, pin and function compatible with 74HC241 and 74HCT241.

Octal non-inverting buffer/line driver with 3-state outputs, low-voltage CMOS device.

Octal non-inverting buffer/line driver with 3-state outputs, low-voltage CMOS device.

The 74LV241 is a low-voltage, Si-gate CMOS device and is pin and function compatible with 74HC241 and 74HCT241. It is an octal non-inverting buffer/line driver with 3-state outputs.

The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs.

The 74HC366; 74HCT366 is a hex inverter/line driver with 3-state outputs controlled by the output enable inputs (OE1).

The 74HC7540; 74HCT7540 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL).