Driver ICs

2-Phase Stepper Motor Unipolar Driver ICs with built-in sequencer and support for 1-2 phase excitation

2-Phase Stepper Motor Unipolar Driver ICs with built-in sequencer and current sense resistor, supporting 1-2 phase excitation and micro-step drive.

2-Phase Stepper Motor Unipolar Driver ICs with 1-2 Phase Excitation Support and Built-in Sequencer.

Low voltage 3-phase brushless motor driver IC with built-in protection and dead time function.

The SMA6860MZ inverter power module (IPM) series provides a robust, highly-integrated solution for optimally controlling 3-phase motor power inverter systems and variable speed control systems used in energy-conservinsg designs to drive motors of residential and commercialn appliances.

The SMA6850MX/MZ inverter power module (IPM) series provides a robust, highly-integrated solution for optimally controlling 3-phase motor power inverter systems and variable speed control systems used in energy-conserving designs to drive motors of residential and commercial appliances.

The SMA685xM series provides a highly-integrated solution by incorporating key components into one package – MOSFETs in a 3-phase full-bridge configuration, built-in protection functions such as UVLO (undervoltage lockout) and TD (thermal detection) circuits, pre-driver ICs with 7.5 V regulator output, and bootstrap diodes with limiting resistors.

Highly-integrated 3-phase motor driver ICs with built-in MOSFETs, protection circuits, and bootstrap diodes.

The SMA6850MX/MZ inverter power module (IPM) series provides a robust, highly-integrated solution for optimally controlling 3-phase motor power inverter systems and variable speed control systems used in energy-conserving designs to drive motors of residential and commercial appliances.

The SMA685xM series provides a highly-integrated solution by incorporating key components into one package – MOSFETs in a 3-phase full-bridge configuration, built-in protection functions such as UVLO and TD circuits, pre-driver ICs with 7.5 V regulator output, and bootstrap diodes with limiting resistors.

The SMA6850MX/MZ inverter power module (IPM) series provides a robust, highly-integrated solution for optimally controlling 3-phase motor power inverter systems and variable speed control systems used in energy-conserving designs to drive motors of residential and commercial appliances.

The SMA685xM series provides a highly-integrated solution by incorporating key components into one package – MOSFETs in a 3-phase full-bridge configuration, built-in protection functions such as UVLO (undervoltage lockout) and TD (thermal detection) circuits, pre-driver ICs with 7.5 V regulator output, and bootstrap diodes with limiting resistors.

The SMA685xM series provides a highly-integrated solution by incorporating key components into one package – MOSFETs in a 3-phase full-bridge configuration, built-in protection functions such as UVLO (undervoltage lockout) and TD (thermal detection) circuits, pre-driver ICs with 7.5 V regulator output, and bootstrap diodes with limiting resistors.

SLA/SMA6820MH series are high voltage 3-phase motor driver ICs in which transistors, pre-driver ICs (MICs), and bootstrap circuits (diodes and resistors) are highly integrated.

The SMA6820MH inverter power module (IPM) series provides a robust, highly-integrated solution for optimally controlling 3-phase motor power inverter systems and variable speed control systems used in energy-conserving designs to drive motors of residential and commercial appliances.

SLA/SMA6820MH series are high voltage 3-phase motor driver ICs in which transistors, pre-driver ICs (MICs), and bootstrap circuits (diodes and resistors) are highly integrated.

SLA/SMA6820MH series are high voltage 3-phase motor driver ICs in which transistors, pre-driver ICs (MICs), and bootstrap circuits (diodes and resistors) are highly integrated.

SLA/SMA682xMH series are high voltage 3-phase motor driver ICs in which transistors, pre-driver ICs (MICs), and bootstrap circuits (diodes and resistors) are highly integrated.

Unipolar 2-Phase Stepping Motor Driver ICs with power supply voltage up to 46V and normal operating range of 10 to 44V.

Unipolar 2-Phase Stepper Motor Driver ICs of the SLA7070MS series.

SLA7070MPRT series unipolar 2-phase stepping motor driver ICs that use a clock input method for control, simplifying circuit design and reducing workload on the control microprocessor.

The SLA7070MPRT series are unipolar 2-phase stepping motor driver ICs that employ a clock input method for control signals, enabling full device control with fewer signal lines compared to conventional phase input methods.

SLA7070MPRT series are unipolar 2-phase stepping motor driver ICs that use a clock input method for control, simplifying circuit design and reducing control microprocessor workload.

Unipolar 2-phase stepping motor driver ICs that use a clock input method for control, reducing the number of signal lines required.

Unipolar 2-Phase Stepper Motor Driver ICs. This document describes summary of the SLA7070MS series.

SLA7070MS series are unipolar 2-phase stepper motor driver ICs.

The SLA7070MPRT series are unipolar 2-phase stepping motor driver ICs that employ a clock input method for control signal input.

This document describes the SLA7070MPRT series, which are unipolar 2-phase stepping motor driver ICs. The SLA7070MPRT series employs a clock input method as a control signal input method, enabling full control of the device operation using only a few signal lines, instead of the conventional phase input method that requires about 10 signal lines.

SLA7070MPRT series unipolar 2-phase stepping motor driver ICs that use a clock input method for control, simplifying circuit design and reducing workload on the control microprocessor.

The SLA7070MPRT series are unipolar 2-phase stepping motor driver ICs that employ a clock input method for control, enabling full device operation with minimal signal lines.

SLA7070MPRT series unipolar 2-phase stepping motor driver ICs that employ a clock input method for control, enabling full device operation using only a few signal lines instead of conventional phase input methods.

SLA7070MPRT series unipolar 2-phase stepping motor driver ICs that use a clock input method for control, simplifying circuit design and reducing workload on the control microprocessor.

Unipolar 2-phase stepping motor driver ICs that employ a clock input method for control, enabling full device operation with minimal signal lines.

The SLA7070MPRT series are unipolar 2-phase stepping motor driver ICs that employ a clock input method for control, enabling full device operation with minimal signal lines.

The SLA7070MPRT series are unipolar 2-phase stepping motor driver ICs that employ a clock input method for control, simplifying circuit design and reducing workload on the control microprocessor.

SLA7070MPRT series unipolar 2-phase stepping motor driver ICs that use a clock input method for control, simplifying circuit design and reducing workload on the control microprocessor.

Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA7060M translator/drivers provide complete control and drive for a two-phase unipolar stepper motor with internal fixed off time and pulse-width modulation (PWM) control of the output current in a power multi-chip module (PMCM™).

The Series SLA706xM translator/drivers provide complete control and drive for a two-phase unipolar stepper motor with internal fixed off time and pulse-width modulation (PWM) control of the output current in a power multi-chip module (PMCM™).

Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA706xM translator/drivers provide complete control and drive for a two-phase unipolar stepper motor with internal fixed off time and pulse-width modulation (PWM) control of the output current in a power multi-chip module (PMCM™).

Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA7060M translator/drivers provide complete control and drive for a two-phase unipolar stepper motor with internal fixed off time and pulse-width modulation (PWM) control of the output current in a power multi-chip module (PMCM™).

Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA706xM translator/drivers provide complete control and drive for a two-phase unipolar stepper motor with internal fixed off time and pulse-width modulation (PWM) control of the output current in a power multi-chip module (PMCM™).

Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA706xM translator/drivers provide complete control and drive for a two-phase unipolar stepper motor with internal fixed off time and pulse-width modulation (PWM) control of the output current in a power multi-chip module (PMCM™).

Combining low-power CMOS logic with high-current, high-voltage power FET outputs, the Series SLA705xM translator/driver provides complete control and drive for a two-phase unipolar stepper motor with internal fixed off time, pulse-width modulation (PWM) control of the output current in a power multi-chip module (PMCM™).

2-Phase Unipolar Stepper Motor Driver

2-Phase Stepper Motor Unipolar Driver ICs for 2-Phase/1-2 Phase Excitation

2-Phase Stepper Motor Unipolar Driver ICs for SLA7031M, SLA7032M, SLA7033M with 2-phase/1-2 phase excitation.

SLA7027MU/SLA7024M/SLA7026M are 2-phase/1-2 phase excitation unipolar driver ICs for stepper motors.

High Voltage 3-Phase Motor Drivers SLA6868MZ and SLA6870MZ

High voltage 3-phase motor drivers with integrated transistors, pre-drive circuits, and bootstrap circuits.

High-voltage 3-phase motor driver IC with integrated IGBTs, protection functions, and pre-driver ICs.