Other Modules

SKY67183-396LF is a 400 to 6000 MHz broadband low-noise amplifier with superior gain flatness and exceptional linearity.

The SKY67159-396LF is an ultra-broadband low-noise amplifier with superior gain flatness and exceptional linearity.

The SKY67159-396LF is an ultra-broadband low-noise amplifier with superior gain flatness and exceptional linearity. The compact 2 x 2 mm, 8-pin Dual Flat No Lead packaged LNA is designed for FDD and TDD 2G/3G/4G LTE small-cell base stations operating from 200 to 3800 MHz.

The SKY67159-396LF is an ultra-broadband low-noise amplifier with superior gain flatness and exceptional linearity.

The SKY67153-396LF is GaAs, pHEMT low-noise amplifier (LNA) with active bias, high linearity, superior gain, and industry-leading noise figure (NF) performance from 700 to 3800 MHz.

GaAs, pHEMT low-noise amplifier (LNA) with an active bias, high linearity, superior gain, and industry-leading noise figure (NF) performance.

SKY66298-11: 900 to 990 MHz High-Efficiency 4 W Power Amplifier

The SKY66112-11 is a high-performance, fully integrated RF front-end module (FEM) designed for ZigBee, Thread, and Bluetooth Smart applications.

The SKY65943-11 is a front-end module (FEM) with an integrated low-noise amplifier (LNA) and pre-filter and post-filter designed for Global Navigation Satellite System (GNSS) receiver applications.

The SKY65047-360LF is a high linearity Low-Noise Amplifier

SKY13377-313LF is a GaAs pHEMT Single-Pole, Double-Throw (SPDT) high power switch with 50 Ω terminated outputs, operating from 0.5 to 6.0 GHz.

The SKY13373-460LF is a CMOS silicon-on-insulator (SOI), single-pole, triple-throw (SP3T) switch.

The SKY13370-374LF is a GaAs pHEMT single-pole, double-throw (SPDT) high power switch with 50 Ω terminated outputs.

The SKY13355-374LF is a pHEMT GaAs Double-Pole, Double-Throw (DPDT) switch designed for 2.4 and 6.0 GHz, dual-band wireless LAN applications.

The SKY13350-385LF is a GaAs pHEMT FET single-pole, double-throw (SPDT) switch for transmit/receive applications.

The SKY13322-375LF is a GaAs FET I/C single-pole, four-throw (SP4T) switch. This general purpose switch is an ideal choice for a variety of multiband telecommunication applications up to 6 GHz.

The SKY13317-373LF is a GaAs pHEMT single-pole, triple-throw (SP3T) antenna switch that operates in the 20 MHz to 6.0 GHz frequency range.

SKY13299-321LF is a high-power GaAs pHEMT FET SPDT switch operating from 20 MHz to 5 GHz with 7 W power handling.

0.3 to 5.0 GHz, 100 W Compact High-Power SPDT Switch with Integrated Driver

0.9 to 4.0 GHz 50 W High Power Silicon PIN Diode SPDT Switch

User's guide for the Si8920ISO-EVB evaluation board designed for the Si8920BC-IP isolated amplifier.

The Si87xx isolators are pin-compatible, one-channel, drop-in replacements for popular optocouplers with data rates up to 15Mbps.

The Si87xx isolators are pin-compatible, one-channel, drop-in replacements for popular optocouplers with data rates up to 15Mbps.

The Si875x enables new pathways to the creation of custom Solid State Relay (SSR) configurations. The Si875x integrates robust isolation technology with an SSR FET driver.

Silicon Lab's family of ultra-low-power digital isolators are CMOS devices offering substantial data rate, propagation delay, power, size, reliability, and external BOM advantages over legacy isolation technologies.

Silicon Lab's family of ultra-low-power digital isolators are CMOS devices offering substantial data rate, propagation delay, power, size, reliability, and external BOM advantages over legacy isolation technologies.

CMOS ultra-low-power digital isolators using RF coupler technology for high-speed, low-power isolation with up to 150Mbps data rates.

The Si8281-EVB is an evaluation board demonstrating the isolated gate drive capabilities of the Si8281CD-IS, including DC-DC operation and low-voltage side connections.

The Si827x isolated gate drivers are ideal for driving power switches used in a wide variety of power supply, inverter, and motor control applications, offering longer service life and dramatically higher reliability compared to opto-coupled gate drivers.

The Si827x isolated gate drivers are ideal for driving power switches used in a wide variety of power supply, inverter, and motor control applications, offering longer service life and dramatically higher reliability compared to opto-coupled gate drivers.

The Si826x isolators are pin-compatible, drop-in upgrades for popular opto-coupled gate drivers, such as 0.6 A ACPL-0302/3020, 2.5 A HCPL-3120/ACPL-3130, HCNW3120/3130, and similar opto-drivers.

Si826x isolators are pin-compatible, drop-in upgrades for popular opto-coupled gate drivers.

The Si826x isolators are pin-compatible, drop-in upgrades for popular opto-coupled gate drivers, utilizing proprietary silicon isolation technology for higher performance and reliability.

The Si80xx evaluation kit allows designers to evaluate Silicon Lab's family of low-power digital isolators. These are CMOS devices offering substantial data rate, propagation delay, power, size, reliability, and external BOM advantages over legacy isolation technologies.

The Silicon Laboratories Si514/570/571/598/599 evaluation kit contains the hardware and software needed for evaluation of the Si514/570/571/598/599 Any-Frequency I2C programmable XO/VCXO and can be run on a USB-equipped PC.

The Si5383-EVB is used for evaluating the Si5383 Network Synchronizer Clock for SyncE/1588 and Stratum 3/3E applications.

The Si5380 is a high performance, integer-based (M/N) clock generator for small cell applications which demand the highest level of integration and phase noise performance.

The Si5356 evaluation board (EVB) is used for evaluating the Si5356 I2C programmable, any frequency 1–200MHz, quad frequency 8-output clock generator.

Si5347 Any-Frequency, Any-Output, Jitter-Attenuating Clock Multiplier.

The Si5346-D-EVB is used for evaluating the Si5346 Any-Frequency, Any-Output, Jitter-Attenuating Clock Multiplier revision D.

The Si5342-D-EVB is used for evaluating the Si5342 Any-Frequency, Any-Output, Jitter-Attenuating Clock Multiplier revision D.

The Si5341-D-EVB is used for evaluating the Si5341 Any-Frequency, Any-Output, Jitter-Attenuating Clock Multiplier revision D.

Si5340 Any-Frequency, Any-Output, Jitter-Attenuating Clock Multiplier revision D.

The Si5332-8EX-EVB is used for evaluating the Si5332 Low Jitter Any-Frequency Clock Generator.

Any-Frequency Precision Clock Timing ICs based on DSPLL® technology for jitter attenuation and clock multiplication.

Any-Frequency Precision Clock Timing ICs with jitter attenuation and clock multiplication capabilities.

Any-Frequency Precision Clock Timing ICs based on third-generation DSPLL® technology.

Any-Frequency Precision Clock Timing ICs based on Silicon Laboratories' third-generation DSPLL® technology, providing any-frequency synthesis in a highly integrated PLL solution.

The Si5317-EVB User’s Guide provides a complete and simple evaluation of the functions, features, and performance of the Si5317. The Si5317 is a pin-controlled 1:1 jitter-attenuating clock for high-performance applications.

The Si53154 is a four port PCIe clock buffer compliant to the PCIe Gen1, Gen2 and Gen3 standards.