Power

The Si3460 is a single-port, –48V power management controller for IEEE 802.3af-compliant PSE (Power Sourcing Equipment).

The AAT4901 FastSwitch™ is a member of Skyworks' Application Specific Power MOSFET (ASPM™) product family. It is a full-bridge buffered power stage operating with an input voltage range of 2.0V to 5.5V.

The AAT4901 FastSwitch™ is a member of Skyworks' Application Specific Power MOSFET (ASPM™) product family. It is a full-bridge buffered power stage operating with an input voltage range of 2.0V to 5.5V.

The AAT4900 FastSwitch is a member of Skyworks' Application Specific Power MOSFET (ASPM™) product family. It is a buffered power half-bridge, consisting of low on resistance power MOSFETs with integrated control logic.

The AAT4687 OVPSwitch™ is a member of the Skyworks Application Specific Power MOSFET (ASPM™) product family. It is a P-channel MOSFET power switch with precise over-voltage protection control, designed to protect low-voltage systems against high-voltage faults up to +28 V.

The AAT4687 OVPSwitch™ is a member of the Skyworks Application Specific Power MOSFET (ASPM™) product family. It is a P-channel MOSFET power switch with precise over-voltage protection control, designed to protect low-voltage systems against high-voltage faults up to +28 V.

The AAT4616A SmartSwitch is a current-limiting P-channel MOSFET power switch designed for high side load switching applications. This switch operates with inputs ranging from 2.4 V to 5.5 V, making it ideal for both 3 V and 5 V systems.

1A Linear Li-Ion Battery Charger for Single and Dual Cell Applications

The AAT3620 BatteryManager™ is a member of AnalogicTech’s Total Power Management IC™ family, designed for high capacity Li+ batteries with up to 2.0A charge current and minimal thermal impact.

The AAT3220 PowerLinear NanoPower low dropout (LDO) linear regulator is ideal for portable applications where extended battery life is critical.

The AAT2785 is a 3-channel 1.8MHz step-down converter for applications where power efficiency and solution size are critical.

The AAT2688 provides two independently regulated DC outputs: a high voltage synchronous step-down (Buck) regulator and a low input voltage step-down low dropout (LDO) regulator. The PMIC is optimized for low cost 12V adapter inputs, making the device the ideal system-on-a-chip power solution for consumer communications equipment.

The AAT2687 provides two independently regulated DC outputs; a high voltage step-down regulator and a low input voltage LDO regulator.

The AAT2500 is a member of Skyworks' Total Power Management IC™ (TPMIC™) product family. It is a low dropout (LDO) linear regulator and a step-down converter with an input voltage range of 2.7V to 5.5V, making it ideal for applications with single lithium-ion/polymer batteries.

The AAT1236 is a highly integrated, high efficiency power solution for white LED and keypad backlights in mobile/portable devices. It is based on a switching boost converter which steps up the single cell lithium-ion/polymer battery voltage to drive 5 strings of series-connected white LEDs with precision current regulation.

The AAT1219 is a high current synchronous boost converter with programmable low side MOSFET peak current limit of 500mA to 2.5A.

The AAT1217 is a high efficiency, synchronous, fixed frequency, step-up converter designed for single-cell or dual-cell alkaline, NiMH, or NiCd battery-powered applications.

AC DC Converters, Offline Switchers ROHS

Tape & Reel (TR) 10 Terminals

P-Channel 0.65mm PMIC 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

5V P-Channel 0.95mm PMIC 5V SC-74A, SOT-753

DFN Tape & Reel (TR) 1.6A

0.5mm PMIC 12 Pin 1MHz 5V 12-TFSOJ (0.094, 2.40mm Width)

PMIC 400kHz 24-WFQFN Exposed Pad

2.4V 12-Pin DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 600kHz Tape & Reel (TR) 3A Switch 12-WFDFN Exposed Pad

Switching Regulator,