Texas Instruments

IC REG LINEAR 5V 150MA SOT23-5.Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT-23-5

IC REG BOOST PROG 700MA 6WSON.Boost Switching Regulator IC Positive Programmable 2.5V, 3V, 3.3V 1 Output 700mA (Switch) 6-WDFN Exposed Pad

IC REG BOOST ADJ 10A 20VQFN.Boost Switching Regulator IC Positive Adjustable 4.5V 1 Output 10A 20-VFQFN Exposed Pad

IC REG BUCK ADJ 3A SOT23.Buck Switching Regulator IC Positive Adjustable 0.6V 1 Output 3A SOT-23-6 Thin, TSOT-23-6

IC REG BUCK ADJ 3A 8SOPWR.Buck Switching Regulator IC Positive Adjustable 1V 1 Output 3A 8-PowerSOIC (0.154", 3.90mm Width)

IC REG BUCK ADJ 5A 8SOPWR.Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 5A 8-PowerSOIC (0.154", 3.90mm Width)

I2C 1-4 cell NVDC Buck-Boost battery charge controller with system power monitor & processor | RSN | 32 | -40 to 85

IC BATT CHG LI-ION 1-6CEL 24VQFN.Charger IC Lithium Ion/Polymer 24-VQFN (4x4)

IC REG BUCK ADJ 3A 16VQFN.Buck Switching Regulator IC Positive Adjustable 0.9V 1 Output 3A 16-VFQFN Exposed Pad

IC REG BCK SPLIT RAIL ADJ 8SOPWR.Buck, Split Rail Switching Regulator IC Positive Adjustable 0.8V 1 Output 3.5A 8-PowerSOIC (0.154", 3.90mm Width)

The TPS5430DDAR is a Texas Instruments 5.5V to 36V input, 3A step-down DC/DC converter from the SWIFT™ regulator family. Featuring an integrated high-side N-channel MOSFET, fixed 500kHz switching frequency, adjustable output voltage down to 1.22V, internal compensation, input voltage feedforward, up to 95% efficiency, and a thermally enhanced 8-pin SO PowerPAD™ package, it is suitable for industrial power supplies, 12V and 24V distributed power systems, embedded electronics, consumer equipment, set-top boxes, LCD displays, battery chargers, high-power LED supplies, and car-audio power rails. The TPS5430DDAR provides a compact and efficient TI buck converter solution for wide-input, medium-current DC/DC power conversion.

IC REG BUCK ADJ 25A 40LQFN.Buck Switching Regulator IC Positive Adjustable 0.6V 1 Output 25A 40-PowerLFQFN

Texas Instruments INA381A1IDSGR is a current-sense amplifier with an integrated overcurrent comparator, fixed 20V/V gain, and 350kHz typical bandwidth. It supports high-side and low-side sensing across a −0.2V to +26V common-mode range while operating from a 2.7V to 5.5V supply. An externally adjustable threshold, active-low open-drain alert, and selectable transparent or latched operation provide flexible current-monitoring and fault-indication functions. The analog output supports connection to a compatible measurement ADC. Supplied in a compact 8-pin, 2mm × 2mm WSON package, the INA381A1IDSGR is suitable for power supplies, DC/DC converters, motor drives, cordless tools, and portable electronic equipment requiring current measurement and hardware overcurrent detection.

Texas Instruments BQ25798RQMR is an I²C-controlled, 1–4-cell buck-boost battery charger with up to 5A charging capability and a 3.6V to 24V input operating range. It integrates solar MPPT, NVDC power-path management, four switching MOSFETs, a battery FET, and current-sensing circuitry. An optional dual-input controller supports external source-selection MOSFETs, while programmable OTG output and fast backup operation extend its power-management functions. The integrated 16-bit ADC provides operating measurements for host supervision. Supplied in a 29-pin, 4mm × 4mm VQFN-HR package, the BQ25798RQMR supports compact charging designs for solar-powered equipment, video doorbells, mobile terminals, asset trackers, and portable instrumentation.

Texas Instruments MSP430AFE253IPWR is a low-power mixed-signal microcontroller featuring three independent 24-bit sigma-delta ADCs, differential programmable-gain inputs, and a 16-bit MSP430 CPU operating at up to 12MHz. With 16KB Flash, 512-byte RAM, a hardware multiplier, and a UART-or-SPI USART, it combines signal acquisition, local processing, and communication in one device. The SD24_A analog front end operates from 2.5V to 3.6V, while multiple low-power modes support energy-conscious designs. Supplied in a 24-pin TSSOP package, the MSP430AFE253IPWR is intended for single-phase electricity meters, digital power monitoring, and sensor measurement systems requiring a compact, programmable analog front end.

Texas Instruments SN74ALVCH16973DGGR is an 8-bit bus transceiver and transparent D-type latch with four independent noninverting buffers. Designed for 1.65V to 3.6V operation, it supports multiplexed address/data bus separation, bidirectional parallel communication, and address retention. Integrated bus-hold circuitry maintains valid states on undriven data connections, while separate transceiver and latch output enables support shared-bus control. Supplied in a 48-pin TSSOP package, the SN74ALVCH16973DGGR operates over a −40°C to +85°C free-air temperature range. Its combined functionality makes it an option for compatible processor-memory interfaces, embedded control boards, instrumentation, and FPGA peripheral circuits requiring coordinated data transfer, latching, and auxiliary signal buffering.

Texas Instruments LM358 is a dual general-purpose operational amplifier for sensor conditioning, active filters, voltage monitoring, and power-supply control circuits. The original LM358 supports a 3V to 30V total supply, 700kHz typical gain-bandwidth product, and 0.3V/µs typical slew rate. Its input common-mode range includes ground, making it useful in single-supply analog designs. Typical quiescent current is 350µA per channel at 5V, and the specified operating ambient temperature range is 0°C to +70°C. TI offers eight-pin SOIC, VSSOP, TSSOP, PDIP, and SOP package options. LM358 remains an active product; the complete ordering suffix determines the package, packing method, and associated ordering details.

The TMS320F28335PGFA is a Texas Instruments C2000™ Delfino™ 32-bit real-time microcontroller / digital signal controller designed for high-performance embedded control applications. Featuring a 150MHz C28x core, 150 MIPS performance, integrated floating-point unit, 512KB Flash, 34K × 16 RAM, 16-channel 12-bit ADC, external memory interface support, and communication peripherals including CAN, I²C, McBSP, SCI/UART, and SPI, it is ideal for motor control, digital power supplies, solar inverters, UPS systems, industrial automation, robotics, energy conversion, and real-time signal-processing applications. Packaged in a 176-pin LQFP, the TMS320F28335PGFA provides reliable TI C2000 real-time control performance for demanding industrial and power electronics systems.

Texas Instruments TMS320F2812PGFA is a 32-bit C2000 real-time control microcontroller featuring a 150MHz C28x DSP core, 256KB flash memory, and 36KB RAM. Its integrated 12-bit ADC provides 16 analog inputs, while dual Event Managers support PWM generation, input capture, and quadrature-encoder feedback. A 16-bit external memory interface and CAN, SPI, UART, and McBSP connectivity support expandable industrial control systems. The TMS320F2812PGFA is supplied in a 176-pin LQFP package and operates from −40°C to +85°C ambient. Suitable applications include motor drives, servo control, digital power conversion, factory automation, and instrumentation. TI supplies this active device in standard JEDEC trays containing 40 units.

Texas Instruments OPA1678IDR is a dual audio operational amplifier for low-noise, low-distortion preamplifiers, buffers, active filters, and audio signal conditioning. It features 4.5nV/√Hz typical input voltage noise, 0.0001% typical THD+N at 1kHz under specified conditions, a 16MHz gain-bandwidth product, and a 9V/µs slew rate. Unity-gain stability and rail-to-rail output capability support flexible circuit designs, while single-supply operation from 4.5V to 36V accommodates varied audio platforms. The OPA1678IDR draws 2mA typical per channel and is supplied in an 8-pin SOIC package with 2,500 devices per reel. Applications include professional microphones, mixers, musical-instrument amplifiers, A/V receivers, and moving-magnet phono preamplifiers.

Texas Instruments AMC1200BDWVR is a precision, fully differential current-sensing isolation amplifier designed for shunt-based current measurement in high-voltage industrial systems. It features a ±250mV differential input range, fixed gain of 8, maximum nonlinearity of 0.075%, 60kHz minimum bandwidth, and 108dB DC common-mode rejection. Its silicon-dioxide isolation barrier provides up to 4250VPEAK isolation voltage, 1200VPEAK working insulation voltage, and minimum 10kV/µs common-mode transient immunity. The AMC1200BDWVR supports a 4.5V to 5.5V input-side supply and a flexible 2.7V to 5.5V output-side supply. Supplied in an 8-pin wide-body SOIC package with 1,000-piece tape-and-reel packaging, it is suitable for motor drives, industrial inverters, power supplies, current monitoring, isolated feedback, and high-voltage control systems.

RS-485 Transceiver with Integrated Transient Voltage Suppression | D | 8 | -40 to 85 IC TRANSCEIVER HALF 1/1 8SOIC

Texas Instruments LMC6082AIMX/NOPB is an A-grade precision CMOS dual operational amplifier featuring ±150µV typical input offset voltage, 10fA typical input bias current, 10TΩ input resistance, 1.3MHz gain bandwidth, and 1.5V/µs slew rate. The device operates from a 4.5V to 15.5V single supply or ±2.25V to ±7.75V dual supplies, with an input common-mode range that includes the negative rail and an output that swings close to both supply rails. Supplied in an active-production, RoHS-compliant 8-pin SOIC package on a 2,500-unit tape-and-reel, the LMC6082AIMX/NOPB is suitable for instrumentation amplifiers, photodiode preamplifiers, medical instruments, transducer interfaces, piezoelectric charge amplifiers, precision rectifiers, integrators, DAC conditioning, and sample-and-hold circuits.

Texas Instruments TMUX6211PWR is a 36V, low-RON, four-channel 1:1 SPST precision analog switch featuring 2Ω on-resistance, bidirectional rail-to-rail signal operation, 1.8V-compatible fail-safe logic, and integrated pull-down resistors. Supplied in a 16-pin TSSOP package, the TMUX6211PWR is designed for programmable logic controllers, factory automation, data acquisition systems, field transmitters, medical equipment, smart meters, instrumentation, and precision analog signal-routing applications.

Texas Instruments ULN2003AN 7-Channel Darlington Transistor Array 50V 500mA Relay Motor Driver IC Texas Instruments ULN2003AN is a high-voltage, high-current Darlington transistor array featuring seven NPN Darlington pairs, 50V output capability, 500mA collector current per channel, and integrated clamp diodes for inductive load protection. Designed for relay drivers, stepper motors, solenoids, LED displays, industrial automation systems, and embedded control applications, the ULN2003AN provides a reliable and cost-effective interface between low-power logic circuits and high-current loads.

Texas Instruments TMS320F28035PAGT C2000 Piccolo 32-bit Real-Time Control MCU 60MHz 128KB Flash Texas Instruments TMS320F28035PAGT is a C2000 Piccolo 32-bit real-time microcontroller featuring a 60MHz C28x CPU, integrated Control Law Accelerator (CLA), 128KB Flash memory, 12-bit ADC, advanced PWM modules, CAN, SPI, I²C, and UART interfaces. Designed for motor control, digital power conversion, renewable energy systems, electric vehicles, and industrial automation applications, the TMS320F28035PAGT delivers high-performance deterministic control processing in a compact 64-pin TQFP package.

Texas Instruments MCF8315A1VRGFR Sensorless FOC Three-Phase BLDC Motor Driver 40V 4A Integrated MOSFET Texas Instruments MCF8315A1VRGFR is an advanced three-phase sensorless BLDC motor driver featuring integrated Field-Oriented Control (FOC), integrated MOSFET power stages, 40V maximum voltage capability, and 4A peak output current. With built-in motor control algorithms, I²C/PWM/analog speed interfaces, motor parameter tuning support, and comprehensive protection functions, the MCF8315A1VRGFR enables efficient and reliable motor control solutions for industrial equipment, smart appliances, robotics, fans, pumps, and battery-powered systems.

The INA186A2QDBVRQ1 is a Texas Instruments automotive-grade high-precision current sense amplifier designed for accurate shunt-based current measurement in automotive and industrial power systems. Featuring 50V/V fixed gain, bidirectional current sensing, -0.2V to +40V common-mode voltage range, 500pA input bias current, ±50µV low offset voltage, 120dB common-mode rejection ratio, 48µA low quiescent current, ENABLE control, and a compact 5-pin SOT-23 package, the TI INA186A2QDBVRQ1 provides a reliable current-monitoring solution for battery management systems, EV power electronics, motor controllers, smart power distribution modules, industrial equipment, and low-power embedded applications.

Texas Instruments INA139NA/3K High-Side Current Sense Amplifier 440kHz SOT-23-5 Current Shunt Monitor Texas Instruments INA139NA/3K is a high-side current shunt monitor designed for precise current measurement in power management and embedded systems. Featuring a 2.7V to 36V input range, 440kHz bandwidth, variable gain configuration, and compact SOT-23-5 package, the INA139NA/3K provides accurate current monitoring for battery management, DC/DC converters, industrial control systems, motor applications, and portable electronics.

Texas Instruments XTR116UA/2K5 is a precision 4-20mA current loop transmitter IC integrating a voltage reference, signal-conditioning circuitry, and current output stage for industrial sensor applications. Supporting 7.5V to 36V loop supplies and providing a regulated 5V output for external sensors, the XTR116UA/2K5 is designed for temperature transmitters, pressure sensors, process control systems, industrial automation equipment, and smart instrumentation requiring accurate and reliable analog signal transmission.

Texas Instruments UCC27517DBVR is a single-channel high-speed low-side gate driver featuring 4A peak source and 4A peak sink current capability, 13ns propagation delay, 5V undervoltage lockout, and a compact SOT-23-5 package. Designed for MOSFET and IGBT switching applications, the UCC27517DBVR is widely used in DC/DC converters, switching power supplies, motor control systems, renewable energy equipment, and industrial power management applications requiring efficient and reliable gate drive performance.

The TPS76333DBVR is a Texas Instruments 3.3V 150mA low-dropout linear regulator (LDO) designed for low-power embedded and portable electronic applications. Featuring a fixed 3.3V output, 150mA output current capability, 2.7V to 10V input voltage range, low 100µA quiescent current, 0.5V dropout voltage, enable control, 60dB PSRR, over-current protection, thermal shutdown, reverse polarity protection, and a compact SOT-23-5 surface-mount package, the TI TPS76333DBVR provides an efficient and reliable power-management solution for microcontrollers, sensors, IoT devices, wireless modules, industrial controllers, and battery-powered electronic systems.

Texas Instruments TMUXHS221NKGR is a high-speed dual 2:1 differential signal multiplexer designed for USB 3.x, PCIe, and high-bandwidth data switching applications. Featuring low insertion loss, bidirectional signal routing, compact VQFN packaging, and support for modern high-speed interfaces, the TMUXHS221NKGR is ideal for laptops, docking stations, embedded computers, consumer electronics, and advanced connectivity systems requiring reliable signal integrity and flexible routing.

Texas Instruments TAS6424EQDKQRQ1 is a four-channel automotive Class-D audio amplifier featuring digital audio input, 45W output power per channel, 2.1MHz PWM switching frequency, I2C diagnostics, and automotive-grade protection functions. Designed for vehicle infotainment systems, digital cockpits, external amplifier modules, and premium automotive audio applications, the TAS6424E-Q1 provides high efficiency, excellent sound quality, and reliable performance for next-generation automotive electronics.

Texas Instruments OPA2277MDTEP is a high-precision, low-noise dual operational amplifier featuring ultra-low 10µV offset voltage, 134dB open-loop gain, 140dB common-mode rejection ratio, 130dB power supply rejection ratio, and low 1nA input bias current. Operating from ±2V to ±18V supplies and supporting -55°C to +125°C extended temperature operation, the OPA2277MDTEP is designed for aerospace, defense, medical equipment, industrial instrumentation, sensor signal conditioning, and precision analog measurement applications requiring exceptional accuracy and reliability.

Texas Instruments LM2595S-3.3 is a 3.3V fixed-output 1A buck switching regulator featuring a 4.5V to 40V input voltage range, 150 kHz switching frequency, integrated current limiting, thermal shutdown protection, and TTL-compatible shutdown control. Designed for industrial control systems, embedded electronics, communication equipment, and power management applications, the LM2595S-3.3/NOPB provides a reliable and efficient DC/DC conversion solution in a compact TO-263 surface-mount package.

The LM1086ISX-3.3/NOPB is a Texas Instruments 1.5A low-dropout fixed 3.3V linear voltage regulator designed for embedded power-management applications. Featuring a 3.3V fixed output, 1.5A load current capability, up to 29V input voltage range, low dropout voltage of approximately 1.3V, current limiting protection, thermal shutdown protection, and a thermally efficient TO-263 surface-mount package, the TI LM1086ISX-3.3/NOPB provides a reliable regulated power solution for microcontrollers, FPGA systems, communication modules, industrial controllers, IoT devices, and embedded electronic equipment.

Texas Instruments INA180A2IDBVR is a 26V, 350kHz current sense amplifier featuring 50V/V fixed gain, high-side and low-side current measurement capability, low offset voltage, rail-to-rail output, and a compact SOT-23-5 package. Designed for battery management systems, DC/DC converters, motor control, automotive electronics, industrial equipment, and power monitoring applications, the INA180A2IDBVR provides accurate, high-speed, and low-power current sensing performance for modern electronic systems.