Computing

XTCIEVMK2X Evaluation Module for TMS320C663X processors

EVMK2L Evaluation Module for SoC with BMC and multiple interfaces.

Dual, Variable Gain Amplifier with Input Buffer

The VCA2613 is a dual, Low-Noise Preamplifier (LNP), plus low-noise Variable Gain Amplifier (VGA). The combination of Active Termination (AT) and Maximum Gain Select (MGS) allow for the best noise performance.

The Texas Instruments TPS7A6201QKTTEVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS7A6201QKTT Linear Regulator.

The TPS78101EVM-339 is an evaluation module for the TPS78101 and TPS781330220 ultra low-power, low-dropout regulators with pin-selectable dual-output voltage levels.

TPS73633EVM evaluation module for testing TPS73633 operation and functionality

The TPS720xxEVM-307 evaluation module (EVM) demonstrates the Texas Instruments TPS720xx tiny low dropout (LDO) linear regulator in a 5-pin WCSP package.

The TPS54160EVM-535 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS54160 DC/DC converter as a high-brightness light emitting diode (LED) driver. The converter is a wide input voltage (3.5–60V), 2.5MHz, non-synchronous, externally compensated, step down converter capable of 1.5A of output current.

The TPS40192EVM-001 is an evaluation module for a synchronous buck converter providing a fixed 1.8-V output at up to 10A from a 12-V input bus, using the TPS40192 controller.

The TPA6135A2 is a DirectPath™ stereo headphone amplifier capable of delivering 25 mW/Ch into 16Ω and requires no output DC blocking capacitors. The TPA6135A2 EVM is a complete, stand-alone audio board.

The TPA6012A4 is a stereo amplifier with 32-steps DC volume control. It supports both speaker and headphone output.

The TPA3122D2 evaluation module (EVM) consists of a single 15W, class-D, stereo audio power amplifier, complete with a small number of external components mounted on a circuit board.

The OMAP-L138 C6000 DSP+ARM processor is a low-power applications processor based on an ARM926EJ-S and a C674x DSP core.

OMAP-L138 C6000 DSP+ARM processor is a low-power applications processor based on an ARM926EJ-S and a C674x DSP core.

The OMAP-L138 C6000 DSP+ARM processor is a low-power applications processor based on an ARM926EJ-S and a C674x DSP core.

Zoom OMAP-L138 eXperimenter Kit provides a product-ready hardware and software platform for evaluating the Texas Instruments OMAP-L138 processor and Logic SOM.

Development kit for evaluating Texas Instruments OMAP-L138 processor and Logic SOM.

The AM572x IDK is a standalone test, development, and evaluation module that enables developers to write software and develop hardware for industrial control and industrial communications applications.

The AM571x IDK is a standalone test, development, and evaluation module that enables developers to write software and develop hardware for industrial control and industrial communications applications.

AM335x Sitara ARM Cortex-A8 processors with known exceptions to functional specifications.

The AM3359 Industrial Communications Engine (ICE) is a development platform targeted for systems that specifically focus on the industrial communications capabilities of the Sitara AM335x generation of ARM® Cortex™-A8 microprocessors (MPUs).

Zoom AM3517 eXperimenter Kit for evaluating Texas Instruments AM3517 processor and Logic PD SOM.

Getting started guide for setting up the AM18x EVM and installing the software.

The device is a Low-power applications processor based on ARM926EJ-S™. The device enables OEMs and ODMs to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processors solution.

Comprehensive software for DM8168 and DM8148 DaVinci™ digital media processors

TMS320C66x multicore DSPs for high-performance computing. Delivering the industry’s most power efficient, scalable solutions for high-performance computing.

The TMS320C6670 Lite Evaluation Module (EVM), or TMDXEVM6670L, is an easy-to-use, cost-efficient development tool that is designed to help developers quickly get started with designs using the C6670 multicore DSP.

Mezzanine EVM Board for the TMS320C6474 Digital Signal Processor, providing a platform for software development and hardware evaluation.

The TMS320C64x+™ DSPs (including the TMS320C6455 device) are the highest-performance fixed-point DSP generation in the TMS320C6000™ DSP platform. The C6455 device is based on the third-generation high-performance, advanced VelociTI™ very-long-instruction-word (VLIW) architecture developed by Texas Instruments (TI).

TMS320C5515 Fixed-Point Digital Signal Processor, a member of TI's TMS320C5000™ family, designed for low-power applications.

The AM437x GP EVM is a standalone test, development, and evaluation module system that enables developers to write software and develop hardware around an AM437x processor subsystem.

The OMAP35x EVM from Mistral is a low cost and easy-to-use development platform based on TI's OMAP35x multimedia applications processor. Designed with a modular and extendable architecture, the 35x EVM helps developers leverage the benefits of the powerful 35x processor with advanced Superscalar ARM® Cortex™-A8 RISC core.

Development kit for evaluating the TI Sitara AM1808 processor.

The C2000 Experimenter Kits from Texas Instruments are ideal products for initial device exploration and testing.

C2000 Concerto microcontrollers combine an industry-leading Host core and control core to eliminate compromises between control and communications.

The C2000 Experimenter Kits from Texas Instruments are ideal products for OEMs to use for initial device exploration and testing. The Piccolo F28069 Experimenter Kit has a docking station that features on board USB JTAG emulation, access to all controlCARD signals, breadboard areas and RS-232 and JTAG connectors.

C2000™ Experimenters Kits from Texas Instruments are device evaluation kits, providing a platform for initial device exploration and prototyping.

C2000 Concerto microcontrollers combine an industry-leading control core (C28x) and host core (ARM Cortex-M3) to eliminate compromises between real-time control and communications.

TMS570LS31x/21x 16/32-Bit RISC Flash Microcontroller

Hercules safety microcontrollers are based on TI’s 20+ years of safety-critical system expertise, industry collaboration and proven hardware for the automotive market.

TMS570 controlCARDs are board-level modules for software development and prototyping with high-performance controllers.

The TMS470M and TMS570 microcontroller family enables developers to easily create safety-related applications for the transportation industry. TMS470M microcontrollers use the widely adopted ARM® Cortex™-M3 CPU running at 80MHz while the TMS570 microcontrollers integrate dual ARM® Cortex™-R4F floating point processors in lock-step running up to 160MHz.

The TMS470M and TMS570 microcontroller family enables developers to easily create safety-related applications for the transportation industry. TMS470M microcontrollers use the widely adopted ARM® Cortex™-M3 CPU running at 80MHz while the TMS570 microcontrollers integrate dual ARM® Cortex™-R4F floating point processors in lock-step running up to 160MHz.

The TMS470M and TMS570 microcontroller family enables developers to easily create safety-related applications for the transportation industry.

The TMS570LS12 Hercules Development Kit (HDK) is a tabletop card based on the Texas Instruments TMS570LS1227 Microcontroller, designed for evaluating microcontroller characteristics and beginning application development.

TMS570 controlCARDs from Texas Instruments are board-level modules utilizing an industry-standard DIMM form factor for software development and prototyping, featuring high-performance controllers with easy access.

The TMS570LS0432 HDK is a low cost and easy to use hardware and software platform for evaluating the functionality of the Texas Instruments TMS570LS0432 microcontroller family.

The TMDX5515eZdsp is a small form factor, very-low-cost USB-powered DSP development tool which includes all the hardware and software needed to evaluate the industry’s lowest power 16-bit DSP: the TMS320C5515.

TMS470M and TMS570 microcontrollers for safety-related applications in the transportation industry. TMS470M uses ARM Cortex-M3 at 80MHz, TMS570 uses dual ARM Cortex-R4F up to 160MHz.