Integrated Circuits - ICs

The XTR300 is a complete output driver for industrial and process control applications.

The XTR117 is a precision current output converter designed to transmit analog 4-20mA signals over an industry-standard current loop.

The XTR115 and XTR116 are precision current output converters designed to transmit analog 4-to-20mA signals over an industry standard current loop.

Monolithic 4-20mA two-wire current transmitters with sensor excitation and linearization.

The XTR112 and XTR114 are monolithic 4-20mA, two-wire current transmitters. They provide complete current excitation for high impedance platinum RTD temperature sensors and bridges, instrumentation amplifier, and current output circuitry on a single integrated circuit.

The XTR112 and XTR114 are monolithic 4-20mA, two-wire current transmitters with sensor excitation and linearization.

Monolithic 4-20mA two-wire current transmitters with sensor excitation and linearization for RTD temperature sensors and bridges.

The XTR112 and XTR114 are monolithic 4-20mA, two-wire current transmitters.

The XTR112 and XTR114 are monolithic 4-20mA, two-wire current transmitters. They provide complete current excitation for high impedance platinum RTD temperature sensors and bridges, instrumentation amplifier, and current output circuitry on a single integrated circuit.

The XTR112 and XTR114 are monolithic 4-20mA, two-wire current transmitters. They provide complete current excitation for high impedance platinum RTD temperature sensors and bridges, instrumentation amplifier, and current output circuitry on a single integrated circuit.

The XTR111 is a precision voltage-to-current converter designed for the standard 0mA–20mA or 4mA–20mA analog signals, and can source up to 36mA.

The XTR110 is a precision voltage-to-current converter designed for analog signal transmission.

The XTR108 is a "smart," programmable, 4-20mA, two-wire transmitter designed for temperature and bridge sensors.

The XTR106 is a low cost, monolithic 4-20mA, two-wire current transmitter designed for bridge sensors. It provides complete bridge excitation, instrumentation amplifier, sensor linearization, and current output circuitry.

The XTR106 is a low cost, monolithic 4-20mA, two-wire current transmitter designed for bridge sensors.

The XTR105 is a monolithic 4-20mA, 2-wire current transmitter with two precision current sources.

The XTR105 is a monolithic 4-20mA, 2-wire current transmitter with two precision current sources for platinum RTD temperature sensors and bridges.

The XTR105 is a monolithic 4-20mA, 2-wire current transmitter with two precision current sources. It provides complete current excitation for platinum RTD temperature sensors and bridges, instrumentation amplifiers, and current output circuitry on a single integrated circuit.

The XTR104 is a monolithic 4-20mA, two-wire current transmitter integrated circuit designed for bridge input signals.

The RM42L432 device is a high-performance microcontroller for safety systems with dual CPUs in lockstep, ECC on flash and RAM, and parity protection.

The RM41L232 is a 16- and 32-Bit RISC Flash Microcontroller for safety-critical applications with dual CPUs in lockstep, ECC on flash and RAM, and integrated safety features.

OMAP-L137 is a C6000 DSP+ARM Processor device with known exceptions to functional specifications for various silicon revisions.

OMAP3515 and OMAP3503 high-performance, applications processors are based on the enhanced OMAP™3 architecture.

The XIO2000A Evaluation Board (EVM) implements a Peripheral Component Interconnect (PCI) Express to a PCI bridge circuit using the Texas Instruments XIO2000A PCI Express to PCI Bus Translation Bridge.

PCI Express to PCI Bus Translation Bridge.

The XIO2200A is a PCI Express to PCI Bus Translation Bridge with 1394a OHCI and Two-Port PHY.

The XIO2001 is a single-function PCI Express to PCI translation bridge that is fully compliant to the PCI Express to PCI/PCI-X Bridge Specification, Revision 1.0.

XIO2000A/XIO2000AI PCI Express to PCI Bus Translation Bridge

AM571x Sitara™ Processors are ARM-based applications processors built to meet the intense processing needs of modern embedded products.

The 66AK2Hxx platform combines the quad ARM Cortex-A15 processor with up to eight TMS320C66x high-performance DSPs using the KeyStone II architecture.

66AK2Hxx Multicore DSP+ARM KeyStone™ II System-on-Chip (SoC) combining quad ARM Cortex-A15 processor with up to eight TMS320C66x high-performance DSPs.

The 66AK2Hxx platform combines the quad ARM Cortex-A15 processor with up to eight TMS320C66x high-performance DSPs using the KeyStone II architecture.

66AK2G0x is a family of heterogeneous multicore System-on-Chip (SoC) devices based on TI’s field-proven Keystone II (KS2) architecture.

66AK2E0x Multicore DSP+ARM KeyStone II System-on-Chip (SoC) with up to four ARM Cortex-A15 processor cores and one C66x DSP core, running at up to 1.4 GHz.

Four-channel analog front-ends (AFEs) for imaging signals with CDS, PGA, ADC, input clamp, OB clamp, serial interface, and adjustable timing control.

The VSP7500/VSP7502 are four-channel analog front-ends (AFEs) for imaging signals.

The VSP7500/VSP7502 are four-channel analog front-ends (AFEs) for imaging signals.

Four-channel analog front-ends (AFEs) for imaging signals.

The VSP5620/21/22 are high-speed, high-performance, 16-bit analog-to-digital-converters (ADCs) that have four independent sampling circuit channels for multi-output charge-coupled device (CCD) and complementary metal oxide semiconductor (CMOS) line sensors.

The VSP5010 is a complete application-specific standard product (ASP) for charge-coupled device (CCD) line sensor applications such as copiers, scanners, and facsimiles.

12-Bit, 31-MSPS, Dual-Channel CCD Analog Front-End for Digital Copiers

12-Bit, 31-MSPS, Dual-Channel CCD Analog Front-End for Digital Copiers. The VSP5010 is a complete application-specific standard product (ASP) for charge-coupled device (CCD) line sensor applications.

The VSP5000 device is a complete application specific standard product (ASSP) for charge-coupled device (CCD) line sensor applications such as copiers, scanners, and facsimiles.

The VSP3200 and VSP3210 are complete CCD image processors that operate from single +5V supplies.

The VSP3200 and VSP3210 are complete CCD image processors that operate from single +5V supplies.

The VSP3200 and VSP3210 are complete CCD image processors that operate from single +5V supplies.

The VSP3200 and VSP3210 are complete CCD image processors that operate from single +5V supplies. This complete image processor includes three Correlated Double Samplers (CDSs) and Programmable Gain Amplifiers (PGAs) to process CCD signals.

Complete CCD image processors that operate from single +5V supplies.

14-Bit, 10MHz CCD/CIS Signal Processor

14-Bit, 10MHz CCD/CIS Signal Processor