Uncategorized

Ripple attenuator modules that reduce output ripple to <3 mV pp for VI-200/VI-J00-based products, compatible with 5 to 50 Vdc output, full attenuation up to 20 A, with 93-99% efficiency.

Vicor’s MegaMod and MegaMod Jr. Families of single, dual and triple output DC-DC converters provide power system designers with cost effective, high performance, off-the-shelf solutions to applications that might otherwise require a custom supply.

The Harmonic Attenuator Module (HAM) accepts an input of 85 – 264 Vac. It provides a DC output compatible with Vicor’s VI-26x, VI-J6x and user-defined Maxi, Mini and Micro DC-DC converters.

Harmonic Attenuation Module compatible with VI-26x and VI-J6x modules, providing unity power factor and meeting IEC 6100-3-2 for line current harmonic content.

High-Boost Harmonic Attenuation Module (HAM) is a universal AC input power factor correction (PFC) front-end module optimized for use with Vicor's V375 series of DC-DC converters.

The AIM (Alternating Input Module) is an AC front-end module which interfaces directly with worldwide AC mains.

The AIM (Alternating Input Module) is an AC front-end module which interfaces directly with worldwide AC mains.

Ripple attenuator modules may be connected to VI-200 or VI-J00 converters, FlatPACs, ComPACs or MegaModules, with output voltages from 5 – 50 V, to limit output noise to less than 3 mV peak-to-peak at loads up to 20 A.

Vicor's MicroRAM output ripple attenuation module combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from 1.1 KHz to 1 Mhz.

Vicor's MicroRAM output ripple attenuation module combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from 1.1 KHz to 1 Mhz.

Vicor's MicroRAM output ripple attenuation module combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from 1.1 KHz to 1 Mhz.

Vicor’s MicroRAM output ripple attenuation module combines both active and passive filtering to achieve greater than 40 dB of noise attenuation from 1.1 KHz to 1 Mhz.

Output ripple attenuation module combining active and passive filtering for >40 dB noise attenuation from 1.1 KHz to 1 MHz.

The QPI-8 incorporates a total hot swap function with an EMI filter for DC/DC converter applications. The product aligns with the AdvancedTCA™ PICMG3.0 requirements for hot insertion and board level conducted noise limitations.

14 A Active EMI Filter SIP for 48 Vdc Bus

The QPI-4 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz.

The QPI-12 EMI filter is specifically designed to attenuate conducted common-mode (CM) and differential-mode (DM) noise of Vicor’s V•I Chip™ products, such as the PRM, VTM and BCM converters, to comply with the CISPR22 standard requirements for conducted noise measurements.

The AC input module interfaces directly with AC mains to provide line rectification, EMI filtering, transient protection, and inrush limiting.

MI-IAM is an accessory product to Vicor’s MI-Series of DC-DC converters that provides EMI filtering and transient protection.

The M-FIAM9 is a DC front-end module that provides EMI filtering and transient protection for military applications.

The M-FIAM7 is a DC front-end module that provides EMI filtering and transient protection.

Military COTS 28 Vin Filter module providing EMI filtering and transient protection for DC-DC converters.

The M-FIAM5B is a DC front-end module that provides EMI filtering and transient protection.

DC front-end module providing transient protection, inrush current limiting and Class B EMI filtering in a Mini-size package.

The FIAM is a DC front-end module providing transient protection, inrush current limiting and Class B EMI filtering in a Mini-size package.

DC front-end module for rail applications with transient protection, inrush current limiting, and EMI filtering.

The FARM (Filter/Autoranging Rectifier Module) is an AC front-end module which provides EMI filtering, autoranging line rectification and inrush current limiting.

The FARM (Filter/Autoranging Rectifier Module) is an AC front-end module which provides EMI filtering, autoranging line rectification and inrush current limiting.

AC front-end solution for compliance to electromagnetic compatibility (EMC) standards, consisting of MiniHAM passive harmonic attenuation module and FARM3 autoranging AC-DC front-end module.

VI Bricks provide access to Vicor's VI Chip® technology with enhanced thermal management options, featuring high efficiency and a thermally enhanced low profile package with an isolated thermal interface.

Heatsink for VIBrick L-FLOW 1.25 modules

Simplified thermal management is one of the benefits of using Vicor converters. High operating efficiency minimizes heat loss, and the low-profile package features an easily accessible, electrically isolated thermal interface surface.

Aluminum heatsink, RoHS compliant, chromium-free.

Aluminum extrusion chassis part, RoHS compliant.

Glass Passivated Single-Phase Bridge Rectifier

Wiha ESD Safe SoftFinish Cushion Grip Screwdrivers for working on static sensitive components.

Simplified thermal management is one of the benefits of using Vicor converters. High operating efficiency minimizes heat loss, and the low-profile package features an easily accessible, electrically isolated thermal interface surface.

A line filter harmonic attenuator module compatible with VI-HAM-xL and VI-HAM-xM, requiring external filter for EMI/RFI emissions and providing transient surge protection.

Professional torque control tools including adjustable torque screwdrivers, handles, blades, and accessories with calibration certificates.

Heat sink / cooling fin ROHS

InMate is an innovative solution for through-hole socket requirements, consisting of individual plastic carriers for input and output, each containing an array of sockets for full, half or quarter-brick sized modules.

InMate is an innovative through-hole socket mount system for Maxi, Mini, and Micro Family DC-DC converters and configurable power supplies.

InMate is a through-hole socket mount system for Maxi, Mini, Micro family DC-DC converters and configurable power supplies, using plastic carriers that hold sockets for input and output.

Mechanical socket for electronic components with multiple size variants.