LTC4371CDD#PBF [Analog Devices]

LTC4371CDD#PBF Overview

There is a 10-WFDFN Exposed Pad case that comes with it. In this case, it is suitable to pack the part in a Tube case. In this case, the part is mounted in the direction of Surface Mount. The voltage that is applied to the circuit is -4.5V~-600V. There must not be a minimum operating temperature of 0°C~70°C for this component. The component connected to -48V Dist Power Systems, AdvancedTCA® Systems is a good match for this component. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. In this case, the FET type can be recognized as N-Channel. 10 terminations are available in the part in order to meet your needs. There are 10 pins on the board and it is designed with them. A part based on LTC4371 is used in this part. Powered by 12.4V, it is capable of delivering its performance to its customers. It is important to note that the part has 10 pins. It is important that Vsup for this part does not fall below 4.5V. A maximum supply voltage is achieved as soon as Vsup reaches 16V, which means it is at its maximum level. A supply current of 300?A is used to operate the device when it is in operation. In order to conduct under 9.5mA, the supply current (Isup) should be conducted. In order to mount the part properly, it is recommended to mount it by Surface Mount.

LTC4371CDD#PBF Features

in a 10-WFDFN Exposed Pad case
FET Type: N-Channel
10 terminations

LTC4371CDD#PBF Applications

There are a lot of Linear Technology/Analog Devices
LTC4371CDD#PBF Ideal Diode controller applications.

• Active OR-ing of Redundant (N+1) Power Supplies
• Automotive battery protection
• ADAS domain controller
• Camera ECU
• Head Unit
• USB HUBs
• Active ORing for redundant power
• Factory automation and control - PLC digital output modules
• Industrial motor drives
• Industrial transport