MAX275ACPP+ [Analog Devices]

MAX275ACPP+ Overview

As far as packaging is concerned, it comes in a 20-DIP (0.300, 7.62mm) package.There is a Tube package that comes with it.I would like to point out that the gadget has a Through Hole mounting type.In this case, the part's filter type is Continuous, Band Pass Low Pass.I believe it should be able to work with a power source of 4.74V~11V ±2.37V~5.5V, if it works at all.20-pins are used in total on this board.MAX275 is the best component of the device, because it is the most important part of the device.There is either a cutoff or a center frequency in the device when it is operating at 300kHz frequency.As the peak reflow temperature reaches 260, the reflow process begins.There is always a source of 5V being used to power the component at all times.Filter is important to note that 2 refers to the filter figure.Filter is important that Filter is warmer than 0°C when Filter is in operation.There is currently a maximum working temperature of 70°C in the system.There is no change in the pin number of the component, as 20 remains the same.A Through Hole mount package is included with the Through Hole mount package, and you will be able to use it.In this DC DC switching regulator, the supply voltage will be 5V, and it will operate off of that voltage.

MAX275ACPP+ Features

Supply voltage of 5V
Maximum operating temperature of 70°C
Mount of Through Hole

MAX275ACPP+ Applications

There are a lot of Maxim Integrated
MAX275ACPP+ active filters applications.

• Echo Cancellation
• Complex Multiply-Add
• Sample Rate Converters
• Digital Down Conversion
• D/A and A/D pre/post Filtering
• Tuning Bandwidth Expansion for HSP45116 and HSP45106
• Quadrature, Complex Flterlng
• Image Processing
• Polyphase Flterng
• Adaptive Fllterlng