MAX333ACPP+ [Analog Devices]

MAX333ACPP+ Overview

Shipping overseas is convenient due to the electrical component's packing in 20-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around 0°C~70°C TA. 20 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 20 pins. Multiplexers built on a SPDT switching circuit are built. Try searching for the analog switch ic with MAX333 if you are looking for variants. As far as internal resistance is concerned, it has 35Ohm. To find out what the functions of 20 pins are, please refer to their datasheets. Users shouldn't supply more than 30V voltage to the switch device. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 10V. This digital switch can be operated with a current of 1?A. Put voltage above 50?A on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 4.5V. Operating voltages range from 20V. There is 140Ohm resistance between Drain and Source for this electronic part.

MAX333ACPP+ Features

4 Channels
Switch Circuit: SPDT
1?A Supply Current
Drain-to-Source resistance: 140Ohm

MAX333ACPP+ Applications

There are a lot of Maxim Integrated
MAX333ACPP+ Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions