MAX394CAP+T [Analog Devices]

MAX394CAP+T Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-SSOP (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. In total, there are 20 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 20 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. A total of 4 circuits make up this switch device. Search with MAX394 if you are looking for analog multiplexer variants. It has an internal resistance of 35Ohm. The functions of 20 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 16V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2.4V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1?A. A digital multiplexer may suffer damage if voltage is applied above 60nA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. In the case of dual power supplies, you should connect at least 2.4V. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 8V operating voltages for the electrical part.

MAX394CAP+T Features

1 Channels
Switch Circuit: SPDT
1?A Supply Current

MAX394CAP+T Applications

There are a lot of Maxim Integrated
MAX394CAP+T Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems