MAX4246AKA+ [Maxim]

MAX4246AKA+ Overview

It is packaged in an SOT-23-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. There should be no change in the voltage gain at 120dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 2.5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 2.75V volts.

MAX4246AKA+ Features

8 Pins
supply voltage of 2.7V
120dB voltage gain

MAX4246AKA+ Applications

There are a lot of Maxim Integrated
MAX4246AKA+ Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering