MAX4322EUK [Maxim]

MAX4322EUK Overview

It is packaged in an SOT-23-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 5 pins. There should be no change in the voltage gain at 106dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 6.5V, which is suitable. Keeping the linear amplifier's supply voltage above 2.4V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 3.25V volts.

MAX4322EUK Features

5 Pins
supply voltage of 5V
106dB voltage gain

MAX4322EUK Applications

There are a lot of Maxim Integrated
MAX4322EUK Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering