MAX4612CSD [Analog Devices]

MAX4612CSD Overview

Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around 0°C~70°C TA. 14 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 14 pins. Multiplexers built on a SPST - NO/NC switching circuit are built. It consists of 4 circuits. Try searching for the analog switch ic with MAX4612 if you are looking for variants. As far as internal resistance is concerned, it has 100Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 12V voltage to the switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 2V. This digital switch can be operated with a current of 1?A. This analogue multiplexer requires a voltage of 2V~12V when it drains from a single voltage supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Check out the electrical component's additional features, such as the following: ALSO OPERATES AT 5V AND 12V VCC.

MAX4612CSD Features

1 Channels
Switch Circuit: SPST - NO/NC
1?A Supply Current
-3db Bandwidth: 300MHz
Additional Features: ALSO OPERATES AT 5V AND 12V VCC

MAX4612CSD Applications

There are a lot of Maxim Integrated
MAX4612CSD Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions