MAX4802ACCM+ [Analog Devices]

MAX4802ACCM+ Overview

The electrical component comes in 48-LQFP packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tray is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around 0°C~70°C TA extended. In total, 48 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. Into the electrical component body are injected 48 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Circuits number 8 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4802. A 25Ohm internal resistance characterizes this multiplexer. The datasheets for the 48 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2.7V as the lowest voltage for the electrical part. Analogue multiplexers require a 2.7V~6V voltage to drain from a single voltage supply. A voltage higher than 3?A may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 185VFor dual power supplies, a voltage of at least 40V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.

MAX4802ACCM+ Features

1 Channels
Switch Circuit: SPST - NO

MAX4802ACCM+ Applications

There are a lot of Maxim Integrated
MAX4802ACCM+ Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)