MAX6337US16D2-T [Analog Devices]

MAX6337US16D2-T Overview

It is mounted through 4 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 245. During operation, the power ic is supplied with a voltage of 3V. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 4 pins on the board. 4 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 3.3μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6337, which is the base power ics number.

MAX6337US16D2-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.3μA operating supply current

MAX6337US16D2-T Applications

There are a lot of Maxim Integrated
MAX6337US16D2-T Voltage Supervisors applications.

• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging