MAX6440UTFGRD7+T [Analog Devices]

MAX6440UTFGRD7+T Overview

The SOT-23 package is suitable for battery instrument. A system battery like this uses an analog IC named POWER SUPPLY SUPPORT CIRCUIT. We have 2 channels available. 6 pins are attached to it. It is recommended that you mount this electrical component using Surface Mount. The voltage supply for this electric component should not be less than 1V volts. The family name of this electrical component is Power Management Circuits. It is recommended that the power management IC's supply voltage is 5.5V higher than 5.5V volts. In order for this system battery to be activated, its value cannot be less than 0. A temperature below 85°C is recommended for its use. The battery protector ic is powered by a volt of 1.2/5V. The power IC has a total of 6 pins. Battery protection ICs should have a minimum reset threshold voltage under 3.383V. A minimum reset threshold voltage of 3.218V should be exceeded by the power management IC.

MAX6440UTFGRD7+T Features

Available in SOT-23 Package
with 6 Pins
The Min Reset Threshold Voltage at 3.218V

MAX6440UTFGRD7+T Applications

There are a lot of Maxim Integrated
MAX6440UTFGRD7+T Battery Management ICs applications.

• A/C power substations
• Internet infrastructure equipment
• Aviation ground support systems
• Tower communications
• Weather stations
• Distributed energy resources
• Solar and wind-generating plants
• Electric street sweepers
• Shuttle robots
• Robots