MAX698CWE+ [Analog Devices]

MAX698CWE+ Overview

As you can see, this power management is mounted through 16 terminals. There is a Tube-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 16-SOIC (0.295, 7.50mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. When 3V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 16 pins that are attached to IC management. Supply voltage (Vsup) should be at least 3V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. There is a 5mA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX698, the base power ics number. A power supply of 3.3/5V watts is required for the operation of this power management.

MAX698CWE+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
5mA operating supply current

MAX698CWE+ Applications

There are a lot of Maxim Integrated
MAX698CWE+ Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system