MAX794CSE+ [Analog Devices]

MAX794CSE+ Overview

There are 16 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 2 channels that can be found. In this PMIC, you can find 16-SOIC (0.154, 3.90mm Width) functions for your reference. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. There is a specification for the peak reflow temperature of the package to be 260. In a 3V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 16 pins on IC management. There are 16 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Open Drain, Push-Pull. There is a supply current of 62μA for the power management. You can always use MAX794, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 3/5V volts of power.

MAX794CSE+ Features

Battery Backup Circuit type
Minimum supply voltage of 1V
62μA operating supply current

MAX794CSE+ Applications

There are a lot of Maxim Integrated
MAX794CSE+ Voltage Supervisors applications.

• Power distribution systems of infant care room
• Power distribution systems of ICU
• Power distribution systems of CCU
• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module