MAX795TESA+ [Analog Devices]

MAX795TESA+ Overview

As you can see, this power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 2 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. According to the specification, the package's peak reflow temperature is specified to be 260. When 3.3V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. Supply voltage (Vsup) should be at least 1.1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a 49μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX795, the base power ics number. A power supply of 3.3/5V watts is required for the operation of this power management.

MAX795TESA+ Features

Battery Backup Circuit type
Minimum supply voltage of 1.1V
49μA operating supply current

MAX795TESA+ Applications

There are a lot of Maxim Integrated
MAX795TESA+ Voltage Supervisors applications.

• emergency room
• Medical-specific isolation transformer
• Medical-specific insulation monitor
• Transformer load monitoring equipment
• External alarm
• Display equipment
• DC stabilized power supply module
• Insulation fault location system
• Magnetic resonance imaging
• Stable power system