TL072SG-13 [DIODES]

TL072SG-13 Overview

In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 6mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4mA and 10 . Maintain 106.02dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 85°C degrees. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. This electronic part is recommended to be used with an 1.4mA supply for best performance. A linear amplifier such as this has 2 amplifiers on it.

TL072SG-13 Features

106.02dB voltage gain

TL072SG-13 Applications

There are a lot of Diodes Incorporated
TL072SG-13 Instrumentational OP Amps applications.

• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification