APT50N60JCCU2 Overview

As an op amp's input capacitance parameter, CI, is defined as the capacitance between the input terminals when one input is grounded, this device's maximum input capacitance is 6800pF @ 25V.This device conducts a continuous drain current (ID) of 50A, which is the maximum continuous current transistor can conduct.When the device is turned off, a turn-off delay time of 100 ns occurs as the input capacitance charges before drain current conduction commences.Before drain current conduction can begin, the device's turning-on delay time takes time to charge its input capacitance. This delay time is 30 ns.Voltage at the gate-source terminal of a FET transistor, called the gate-source voltage, or VGS, can be 20V.A normal operation of the DS requires keeping the breakdown voltage above 600V.This transistor requires a drain-source voltage (Vdss) of 600V.In order to reduce power consumption, this device uses a drive voltage of 10V volts (10V).

APT50N60JCCU2 Features

a continuous drain current (ID) of 50A
the turn-off delay time is 100 ns
a 600V drain to source voltage (Vdss)

APT50N60JCCU2 Applications

There are a lot of Microsemi Corporation
APT50N60JCCU2 applications of single MOSFETs transistors.

• Motor drives and Uninterruptible Power Supplies
• Micro Solar Inverter
• DC/DC converters
• Power Tools
• Motor Drives and Uninterruptible Power Supples
• Synchronous Rectification
• Battery Protection Circuit
• Telecom 1 Sever Power Supplies
• Industrial Power Supplies
• PFC stages, hard switching PWM stages and resonant switching