ATV2500BQ-25DC [Microchip]

ATV2500BQ-25DC Overview

24 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a DIP package.The device is programmed with 24 I/O ports.It is programmed to terminate devices at 40.There is a DUAL terminal position on the electrical part in question.The device is powered by a voltage of 5V volts.It is a part of the family Programmable Logic Devices.With 40 pins programmed, the chip is ready to use.2500 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 5V.It is recommended that data be stored in EPROM.In this case, it is mounted by Through Hole.The pins are 40.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.With a minimal supply voltage of 4.75V, it operates.A power supply of 5V volts is required to operate this device.This frequency is 36MHz.It is recommended that the operating temperature be higher than -40°C.It is recommended that the operating temperature be below 70°C.The status of input signals is determined by 13 dedicated inputs.If the maximal frequency is less than 36MHz, it should be lower than that.In programmable logic, a type of logic can be categorized as UV PLD.

ATV2500BQ-25DC Features

DIP package
24 I/Os
40 pin count
40 pins
5V power supplies

ATV2500BQ-25DC Applications

There are a lot of Atmel (Microchip Technology)
ATV2500BQ-25DC CPLDs applications.

• Digital systems
• Portable digital devices
• Handheld digital devices
• Battery operated portable devices
• Complex programmable logic devices
• Digital designs
• Field programmable gate
• Address decoding
• D/T registers and latches
• Synchronous or asynchronous mode