DSPIC30F2010-30I/SO [Microchip]

Name: DSPIC30F2010-30I/SO
Brand: Microchip
SKU: DSPIC30F2010-30I/SO

Part No:

DSPIC30F2010-30I/SO

Digital Signal Processors & Controllers - DSP, DSC

Manufacturer:

Microchip

Description:

30 MIPS, 12KB Flash, 512B RAM, EEPROM, 28 pins, Motor Control

Datasheet:

Stock Status:

Available for RFQ

Pricing:

Request Volume Pricing

Quote Response:

Within 24 Hours

Shipping:

In-stock parts ship in 1–2 business days

Specification

Type

Parameter

CPU Type

dsPIC® DSC

CPU Speed Max MHz (megahertz)

Program Memory Size (KB)

Multiple Flash Panels

False

Direct Memory Access (DMA) Channels

Temp. Range Min.(C°)

-40

Temp. Range Max.(C°)

125

Operation Voltage Min.(V)

2.5

Operation Voltage Max.(V)

5.5

Pin Count

Low Power

Products Detail

dsPIC30F Motor Control 16-bit Digital Signal Controller. Seamless migration options from this device to dsPIC33F, PIC24H or PIC24F devices in similar packages.

Modified Harvard architecture
C compiler optimized instruction set architecture
24-bit wide instructions, 16-bit wide data path
Up to 30 MIPS operation
DSP Engine for math intensive operations
Modulo and Bit-Reversed Addressing modes
Two 40-bit wide accumulators with optional saturation logic
17-bit x 17-bit single cycle hardware fractional/ integer multiplier
Single cycle Multiply-Accumulate (MAC) operation
40-stage Barrel Shifter
Dual data fetch

Wide operating voltage range (2.5V to 5.5V)
Industrial and Extended temperature ranges

High current sink/source I/O pins: 25 mA/25 mA
Optionally pair up 16-bit timers into 32-bit timer modules
3-wire SPI™ modules (supports 4 Frame modes)
I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
Addressable UART modules with FIFO buffers

Motor Control PWM Module with Complementary or Independent Output modes
Edge and Center Aligned modes
Multiple duty cycle generators
Dedicated time base with 4 modes
Programmable output polarity
Dead time control for Complementary mode
Manual output control
Trigger for synchronized A/D conversions

QEI with Phase A, Phase B and Index Pulse input
16-bit up/down position counter
Count direction status
Position Measurement (x2 and x4) mode
Programmable digital noise filters on inputs
Alternate 16-bit Timer/Counter mode
Interrupt on position counter rollover/underflow

10-bit 1 Msps Analog-to-Digital Converter (A/D)
A/D Conversion available during Sleep and Idle
4 Sample/Hold Channels
Multiple Conversion Sequencing Options

Enhanced Flash program memory with 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
Data EEPROM memory with 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
Fail-Safe clock monitor operation
Detects clock failure and switches to on-chip low power RC oscillator
Programmable code protection
In-Circuit Serial Programming™ (ICSP™)
DC to 40 MHz external clock input
4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
Programmable Brown-out Detection and Reset generation
Sleep, Idle and Alternate Clock modes for power management

Documents

Data Sheets:

dsPIC30F2010 Data Sheet

Product FAQ

1. Is DSPIC30F2010-30I/SO available for RFQ?

Yes. DSPIC30F2010-30I/SO by Microchip is available for RFQ. Submit your required quantity and our team will confirm real-time stock, lead time, and volume pricing.

2. Why is there no fixed price for DSPIC30F2010-30I/SO?

Pricing for DSPIC30F2010-30I/SO can vary by order quantity, market availability, date code, packaging, and delivery destination. Request a quote to receive the latest volume pricing.

3. What are the key specifications of DSPIC30F2010-30I/SO?

DSPIC30F2010-30I/SO is a Microchip Digital Signal Processors & Controllers - DSP, DSC with Configurable Logic Cell Modules (CLC /CCL): 0 and Peripheral Pin Select (PPS)/Pin Muxing: No. Review the product details or submit an RFQ if you need confirmation before purchase.

4. How fast can I get a quote for DSPIC30F2010-30I/SO?

Our sales team usually responds within 24 hours after receiving your RFQ. The quote may include stock status, unit price, lead time, shipping options, and available alternatives.

5. How soon can DSPIC30F2010-30I/SO be shipped?

If stock is confirmed, in-stock parts can usually ship within 1–2 business days. Final lead time depends on quantity, stock source, and delivery destination.

6. Can you suggest alternatives to DSPIC30F2010-30I/SO?

Yes. If DSPIC30F2010-30I/SO is unavailable, obsolete, or does not meet your required lead time, we can help check similar Microchip Digital Signal Processors & Controllers - DSP, DSC parts or compatible alternatives.

RFQ

Part Number:

DSPIC30F2010-30I/SO

Manufacturer:

Microchip

Looking for Pricing? Contact us for volume pricing.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

dsPIC30F Motor Control 16-bit Digital Signal Controller. Seamless migration options from this device to dsPIC33F, PIC24H or PIC24F devices in similar packages.

Modified Harvard architecture
C compiler optimized instruction set architecture
24-bit wide instructions, 16-bit wide data path
Up to 30 MIPS operation
DSP Engine for math intensive operations
Modulo and Bit-Reversed Addressing modes
Two 40-bit wide accumulators with optional saturation logic
17-bit x 17-bit single cycle hardware fractional/ integer multiplier
Single cycle Multiply-Accumulate (MAC) operation
40-stage Barrel Shifter
Dual data fetch

Wide operating voltage range (2.5V to 5.5V)
Industrial and Extended temperature ranges

High current sink/source I/O pins: 25 mA/25 mA
Optionally pair up 16-bit timers into 32-bit timer modules
3-wire SPI™ modules (supports 4 Frame modes)
I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
Addressable UART modules with FIFO buffers

Motor Control PWM Module with Complementary or Independent Output modes
Edge and Center Aligned modes
Multiple duty cycle generators
Dedicated time base with 4 modes
Programmable output polarity
Dead time control for Complementary mode
Manual output control
Trigger for synchronized A/D conversions

QEI with Phase A, Phase B and Index Pulse input
16-bit up/down position counter
Count direction status
Position Measurement (x2 and x4) mode
Programmable digital noise filters on inputs
Alternate 16-bit Timer/Counter mode
Interrupt on position counter rollover/underflow

10-bit 1 Msps Analog-to-Digital Converter (A/D)
A/D Conversion available during Sleep and Idle
4 Sample/Hold Channels
Multiple Conversion Sequencing Options

Enhanced Flash program memory with 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
Data EEPROM memory with 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
Fail-Safe clock monitor operation
Detects clock failure and switches to on-chip low power RC oscillator
Programmable code protection
In-Circuit Serial Programming™ (ICSP™)
DC to 40 MHz external clock input
4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
Programmable Brown-out Detection and Reset generation
Sleep, Idle and Alternate Clock modes for power management

DSPIC30F2010-30I/SO [Microchip]

Part No:

DSPIC30F2010-30I/SO

Category:

Digital Signal Processors & Controllers - DSP, DSC

Manufacturer:

Microchip

Description:

30 MIPS, 12KB Flash, 512B RAM, EEPROM, 28 pins, Motor Control

Datasheet:

Stock Status:

Available for RFQ

Pricing:

Request Volume Pricing

Quote Response:

Within 24 Hours

Shipping:

In-stock parts ship in 1–2 business days

Specification

Products Detail

Documents

Data Sheets:

1. Is DSPIC30F2010-30I/SO available for RFQ?

2. Why is there no fixed price for DSPIC30F2010-30I/SO?

3. What are the key specifications of DSPIC30F2010-30I/SO?

4. How fast can I get a quote for DSPIC30F2010-30I/SO?

5. How soon can DSPIC30F2010-30I/SO be shipped?

6. Can you suggest alternatives to DSPIC30F2010-30I/SO?

Part Number:

DSPIC30F2010-30I/SO

Manufacturer:

Microchip

DSPIC30F2010-30I/SO [Microchip]

Part No:

DSPIC30F2010-30I/SO

Category:

Digital Signal Processors & Controllers - DSP, DSC

Manufacturer:

Microchip

Description:

30 MIPS, 12KB Flash, 512B RAM, EEPROM, 28 pins, Motor Control

Datasheet:

Stock Status:

Available for RFQ

Pricing:

Request Volume Pricing

Quote Response:

Within 24 Hours

Shipping:

In-stock parts ship in 1–2 business days

Specification

Products Detail

Documents

Data Sheets:

1. Is DSPIC30F2010-30I/SO available for RFQ?

2. Why is there no fixed price for DSPIC30F2010-30I/SO?

3. What are the key specifications of DSPIC30F2010-30I/SO?

4. How fast can I get a quote for DSPIC30F2010-30I/SO?

5. How soon can DSPIC30F2010-30I/SO be shipped?

6. Can you suggest alternatives to DSPIC30F2010-30I/SO?

Part Number:

DSPIC30F2010-30I/SO

Manufacturer:

Microchip

Feature