MCP3421A0T-E/CH [Microchip]

The MCP3421 ADC can be used for various high accuracy analog-to-digital data conversion applications where ease of use, low power consumption and small footprint are major considerations. The MCP3421 is a single channel low-noise, high accuracy delta-sigma A/D converter with differential inputs and up to 18 bits of resolution in a small SOT-23-6 package. The on-board precision 2.048V reference voltage enables a differential input range of ±2.048V. The device uses a two-wire I2C™ compatible interface and operates from a single power supply ranging from 2.7V to 5.5V. The MCP3421 ADC performs conversions at rates of 3.75, 15, 60 or 240 samples per second with corresponding resolutions of 18, 16, 14 and 12 bits. The onboard programmable gain amplifier (PGA) provides gain up to 8x. The device has two conversion modes: Continuous mode and One-Shot mode. In One-Shot mode, the device enters a low current standby mode automatically after a conversion, greatly reducing power use.

We welcome questions, comments and recommendations for improvements to this page - please contact us at: [email protected] if you have any; please mention the part number in the email subject header.

• 18-bit resolution
• Small 6-lead SOT-23 packaging
• Differential input operation
• On-board voltage reference with 5 ppm/°C drift
• On-board PGA, gains of 1, 2, 4, 8
• 3.75 SPS (18 bits)
• 15 SPS (16 bits)
• 60 SPS (14 bits)
• 240 SPS (12 bits)
• INL 10 ppm of FSR max
• Low current consumption, 145 µA at 3V
• One-shot or continuous conversion options
• Supports I2C™ serial interface
• Extended temperature range: -40°C to +125°C

• 18-bit resolution
• Small 6-lead SOT-23 packaging
• Differential input operation
• On-board voltage reference with 5 ppm/°C drift
• On-board PGA, gains of 1, 2, 4, 8
• 3.75 SPS (18 bits)
• 15 SPS (16 bits)
• 60 SPS (14 bits)
• 240 SPS (12 bits)
• INL 10 ppm of FSR max
• Low current consumption, 145 µA at 3V
• One-shot or continuous conversion options
• Supports I2C™ serial interface
• Extended temperature range: -40°C to +125°C

• Weight Scales & Weigh Scales: High-precision strain gauge and load cell signal measurement [1].
• Industrial Process Control: Transmitters for pressure, flow, and liquid level sensors [1].
• Temperature Measurement: Direct interfacing with RTDs, thermistors, and thermocouples [1].
• Medical Instrumentation: Portable diagnostic devices, heart rate monitors, and blood glucose meters.
• Battery Monitoring: Accurate voltage, current, and state-of-charge (SoC) tracking in battery management systems (BMS).
• Handheld Metering: Compact, low-power digital multimeters and calibration equipment [1].
• Data Acquisition Systems: High-resolution, multi-channel sensor logging networks (using multiple address variants).