MIC2549A-2YN [Microchip]

MIC2549A-2YN Overview

As you can see, it's packaged in the way of a Tube.This file is included in package 8-DIP (0.300, 7.62mm).This LED driving board is mounted using the mounting type Through Hole.There is a switch type of USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the MIC2549A family.As a result, there are 8 terminations.In order to operate, 8 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 3A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.In this case, it is mounted in the way of Through Hole.The maximum supply voltage for this LED driver is 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.

MIC2549A-2YN Features

Supplied from 5V

MIC2549A-2YN Applications

There are a lot of Microchip Technology
MIC2549A-2YN Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards