SG3843M [Microchip]

SG3843M Overview

With its 8-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 7.6V~30V and has a 7.6V~30V supply voltage. Worked in a 0°C~70°C TA dc switcher before. In this switching controller, the switch can be set to 1Hz~500kHz. The Through Hole allows it to be used for dc dc regulator in general. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Searching "SG*843" will return other relevant dc to dc converter ics. 8 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. In most applications and prototype designs, DC switcher is qualified as a Through Hole. Switching controllers work at 500kHz Hz. When running the voltage regulator dc to dc in a circuit, users should apply 30V to ensure safety and reliability. DC switching uses 11mA when it is dormant. There is 11mA supply current for it.

SG3843M Features

Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz

SG3843M Applications

There are a lot of Microsemi Corporation
SG3843M DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots