74LV74DB [NXP]

74LV74DB Overview

This trigger is configured to use POSITIVE EDGE. It belongs to the family of electronic devices known as LV/LV-A/LVX/H. There is an electronic part that is mounted in the way of Surface Mount. The 14pins are designed into the board. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 1bits. As soon as Vsup reaches 5.5 V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be kept above 1 V. The superior flexibility of this circuit is achieved by using 2 circuits. A total of 3.3 V power supplies are needed to run it. In order for the chip to function, it has 1output lines. A total of 1input lines have been provided. A -12 mAvalue is set for the high level output current. A temperature below 125 °Cis recommended for operation. It is recommended that the operating temperature be greater than -40 °C. Despite its minimal supply voltage of 1 V, it is capable of operating. 5.5 Vis the maximum supply voltage it supports. The logic IC it uses is D FLIP-FLOP. As a result, it is equipped with 2 functions . This device is equipped with a pin count of 14.

74LV74DB Features

14 pins
1 Bits
3.3 V power supplies
2 Functions
14 pin count

74LV74DB Applications

There are a lot of NXP USA Inc.
74LV74DB Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory