74AC175PC [Onsemi]

74AC175PC Overview

16-DIP (0.300, 7.62mm)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Differential. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 2V~6V volts. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74AC series. This D flip flop should not have a frequency greater than 244MHz. A total of 1elements are present in it. There is 40?A quiescent consumption. The 74AC175 family contains it. This T flip flop has a capacitance of 4.5pF farads at the input. There is an electronic part that is mounted in the way of Through Hole. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. It is designed with 4bits. The superior flexibility of this circuit is achieved by using 4 circuits. This T flip flop features a maximum design flexibility due to its output current of 24mA. In order for the chip to function, it has 2output lines. A total of 1input lines have been provided. A -24mAvalue is set for the high level output current. 24mA is the low level output current. A temperature below 85°Cis recommended for operation. It is recommended that the operating temperature be greater than -40°C. Despite its minimal supply voltage of 2V, it is capable of operating. 6Vis the maximum supply voltage it supports. We are able to achieve a frequency of 244MHz.

74AC175PC Features

Tube package
74AC series
16 pins
4 Bits

74AC175PC Applications

There are a lot of ON Semiconductor
74AC175PC Flip Flops applications.

• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory