74AC374SJ [Onsemi]

74AC374SJ Overview

It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). D flip flop is embedded in the Tube package. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74AC series. Its output frequency should not exceed 155MHz. D latch consists of 1 elements. It consumes 40?A of quiescent current without being affected by external factors. JK flip flop belongs to 74AC374 family. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This flip flop is designed with 8 Bits. 8 circuits are used to achieve its superior flexibility. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to ?1? and are available to encode either a decimal or hexadecimal input pattern to typically a binary or ?B. C. D? (binary coded decimal) output code. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The high level output current is set to -24mA. The low level output current is set to 24mA. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. It operates with the minimal supply voltage of 2V. It supports the maximal supply voltage of 6V. The frequency that can be achieved is 155MHz.

74AC374SJ Features

Tube package
74AC series
20 pins
8 Bits

74AC374SJ Applications

There are a lot of ON Semiconductor
74AC374SJ Flip Flops applications.

• Digital electronics systems
• Computers
• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer