74AC377MTCX [Onsemi]

74AC377MTCX Overview

It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. A package named Tape & Reel (TR)includes it. T flip flop uses Non-Invertedas the output. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74AC series. You should not exceed 175MHzin the output frequency of the device. The list contains 1 elements. During its operation, it consumes 40?A quiescent energy. D latch belongs to the 74AC377 family. Its input capacitance is 4.5pFfarads. Surface Mount mounts this electronic component. This board has 20 pins. It has a clock edge trigger type of Positive Edge. There are 8bits in this flip flop. Due to its superior flexibility, it uses 8 circuits. It operates with 8 output lines. Currently, there are 1 input lines present. -24mAis the output current at high level. It is set to 24mAfor low level output current. Operating temperatures should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. The system operates with a minimum supply voltage of 2V. 6Vis its maximum supply voltage. It is possible to obtain a frequency of 175MHz.

74AC377MTCX Features

Tape & Reel (TR) package
74AC series
20 pins
8 Bits

74AC377MTCX Applications

There are a lot of ON Semiconductor
74AC377MTCX Flip Flops applications.

• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory
• Event Detectors