74AC377SC [Onsemi]

74AC377SC Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). The package Tubecontains it. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. It belongs to the 74ACseries of FPGAs. There should be no greater frequency than 175MHzon its output. There are 1 elements in it. As a result, it consumes 40?A of quiescent current without being affected by external factors. This D latch belongs to the family of 74AC377. Its input capacitance is 4.5pF farads. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. The flip flop is designed with 8bits. The superior flexibility of this product is achieved by using 8 circuits. Its output current of 24mAallows for maximum design flexibility. It is designed with 8 output lines. It is reported that there are 1 input lines. High level output current is set to -24mA. Low level output current is set to 24mA. A temperature below 85°Cshould be used for operation. Ideally, the operating temperature should be greater than -40°C. The minimal supply voltage is 2V. The maximum supply voltage supported by the flip flop is 6V. It is possible to achieve a frequency of 125MHz.

74AC377SC Features

Tube package
74AC series
20 pins
8 Bits

74AC377SC Applications

There are a lot of ON Semiconductor
74AC377SC Flip Flops applications.

• Computers
• Communications
• Counters
• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch