74ACT574PC [Onsemi]

74ACT574PC Overview

The flip flop is packaged in 20-DIP (0.300, 7.62mm). Package Tubeembeds it. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ACTseries contain this type of chip. It should not exceed 110MHzin its output frequency. In total, there are 1 elements. There is a consumption of 40?Aof quiescent energy. The 74ACT574family includes it. This JK flip flop has a 4.5pFfarad input capacitance. A part of the electronic system is mounted in the way of Through Hole. This board is designed with 20pins on it. This device has Positive Edgeas its clock edge trigger type. Its superior flexibility is attributed to its use of 8 circuits. With a current output of 24mA , it offers maximum design flexibility. It has 3 output lines to operate.

74ACT574PC Features

Tube package
74ACT series
20 pins

74ACT574PC Applications

There are a lot of ON Semiconductor
74ACT574PC Flip Flops applications.

• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division
• Memory
• Event Detectors
• Data Synchronizers