74F114PC [Onsemi]

74F114PC Overview

The package is in the form of 14-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. In the configuration, Differentialis used as the output. This trigger uses the value Negative Edge. Through Holeis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. It is at 0°C~70°C TAdegrees Celsius that the system is operating. There is JK Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74F series. In order for it to function properly, its output frequency should not exceed 95MHz. The element count is 2 . It consumes 19mA of quiescent The 74F114 family contains this object. It is mounted in the way of Through Hole. There are 14pins on it. The clock edge trigger type for this device is Negative Edge. In order to achieve its superior flexibility, 2 circuits are used. There are no output lines on the JK flip flop. 4input lines are available for you to choose from. A high level output current of 20mAis set. In the low level output current setting, the current is set to 20mA. Ideally, the operating temperature should be below 70°C. If the operating temperature is higher than 0°C, the system should operate properly. In order for it to operate, a supply voltage of 4.5Vis required. A maximum voltage of 5.5V can be provided by it. This frequency can be achieved at 95MHz.

74F114PC Features

Tube package
74F series
14 pins

74F114PC Applications

There are a lot of ON Semiconductor
74F114PC Flip Flops applications.

• Frequency Dividers
• Shift Registers
• Storage Registers
• Bounce elimination switch
• Data storage
• Data transfer
• Latch
• Registers
• Memory
• Frequency division