74F843SPC [Onsemi]

74F843SPC Overview

In the 24-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Tube is the way in which it is packaged. It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Electronic components are mounted using the Through Hole method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. The 74F series contains FPGAs of this type. As a member of the 74F843 family, it falls under that category. This board has 24 pins on it, which is what it is designed for. Electronic parts are mounted using the Through Hole method. It contains 2 input lines where electronic circuits are present. It follows that 1 output lines are generated from the binary equivalent of the input line. It consumes 65mA current from its quiescent state without being affected by external factors at all. The superior flexibility of this circuit can be attributed to the use of 1 circuits. 3mA is set as the low level output current. 24mA is set as the high level output current. It is recommended to work at a temperature lower than 70°C. In order for the system to operate properly, the operating temperature should be higher than 0°C. It is capable of providing a maximum supply voltage of 5.5V. In order for the machine to operate, the supply voltage must be 4.5V.

74F843SPC Features

24-DIP (0.300, 7.62mm) package
74F series
74F843 family
24 pins

74F843SPC Applications

There are a lot of ON Semiconductor
74F843SPC Latches applications.

• Digital bus buffer
• Flip-flops
• Parallel data synchronization
• Parallel data storage
• Shift register
• Pattern generators
• Automotive Infotainment
• Automotive Cluster
• Automotive ADAS
• Automotive Body Electronics