FDBS09H04A [Onsemi]

FDBS09H04A Overview

It is packaged in the manner of a Tape & Reel (TR).There is a TO-263-7, D2Pak (6 Leads + Tab) package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It consists of 7 terminations in total.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 12A.The supply voltage of 12V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 100mOhm resistance.The LED driver is configured with a maximum supply voltage of 38V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5.5V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, there are 1 channels available.

FDBS09H04A Features

Supplied from 12V
Resistance of 100mOhm
1 channels

FDBS09H04A Applications

There are a lot of ON Semiconductor
FDBS09H04A Power Switches ICs applications.

• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards