FPF1015 [Onsemi]

FPF1015 Overview

Tape & Reel (TR) is how it's packaged.The 6-VDFN Exposed Pad package includes it.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It belongs to the family FPF1015.The termination count is 6.The 6 pins are used to operate the LED driver.The maximum output current must drop to 1.5A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.45mOhm resistance is present in the lighting driver.Electrical components such as this are included in the IntelliMAX? series.In this case, the output current is set to 1.5A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 1.8V.This LED driver can handle voltages up to 1.8V volts.As far as input voltage goes, it has a minimum of 800mV volts.1?A is the maximum current required to operate it.

FPF1015 Features

Resistance of 45mOhm

FPF1015 Applications

There are a lot of ON Semiconductor
FPF1015 Power Switches ICs applications.

• Notebook PC
• Telecom and Network Systems
• PC Card Hot Swap
• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap