FPF1108 [Onsemi]

FPF1108 Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 4-UFBGA, WLCSP package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.As you can see, it comes from the FPF1108 family.A total of 4 terminations can be found in it.During operation, the 4 pins are used.To comply with the operation criteria, the maximum output current is reduced to 1.2A.Surface Mount is mounted in the way of this LED driving board.In this case, there is 150mOhm resistance in the LED driving board.It is included in the IntelliMAX? series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum input voltage of the LED driver is 4V volts.There is a minimum input voltage of 1.2V volts for this LED driver.

FPF1108 Features

Resistance of 150mOhm

FPF1108 Applications

There are a lot of ON Semiconductor
FPF1108 Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD