KA2901DMTF [Onsemi]

KA2901DMTF Overview

In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of DTL, MOS, Open-Collector, TTL is being used.We ship the part through Tape & Reel (TR) .In general, the chip type can be classified as General Purpose .A total of 4 elements can be found in it.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 14 pins.Alternatively, you may search for KA2901 to find more pin-to-pin solutions for your specific needs.There is 2.5mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 1.1mA .A current supply greater than 2mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 250nA current into the device.Comparator electronics follows that the voltage gain of the part is 100dB .For normal operation, there should be 36V operating supply voltage applied.

KA2901DMTF Features

DTL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB

KA2901DMTF Applications

There are a lot of ON Semiconductor
KA2901DMTF linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications